Minimum order £500.00 Ex-VAT - Delivery Vehicle Access: 28 ton curtain-sided lorry off-load requirement.

    Shopping Basket

Actis Hybris latest concept in hybrid reflective insulation

Actis Logo - Innovative Heat Reflecting Multi-Foil Insulation and Breather Membrane Hybrids

Actis's new and exciting innovative reflective insulation product, Hybris, is designed and manufactured on a honeycomb structure made of shaped polyethylene foams bonded to aluminium coated polyethylene foils.

Exceptional thermal performance is created by the special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement.

Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities.

Product Application

Actis Hybris Honey Comb Innovative Hybrid Multi-foil Insulation

Actis Hybris is the latest insulation innovation for pitched roof, ceiling, and timber frame or masonry wall applications.

Product Description

Hybris is available in rolls 1200mm wide and in a range of thickness’s from 30mm to 300mm every 15mm.

Hybris reflective insulation product, with its large number of low emissivity internal cavities resulting in a very high thermal performance, is available from 45mm to 300mm thick.

Its low emissivity external films provide additional thermal resistance

Currently, the thickness’s of 75mm; 90mm; and 105mm are manufactured, with more thickness sizes to follow shortly.

Product Benefits

Actis H'Control Hybrid provides dual performance within a single product : a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U Value. It can be used in conjunction with any type of insulation
H'Control Hybrid is available in rolls of 10m2 (1600mm wide), 45mm thick

Hybris is a product that is ...

Intrinsically airtight, stopping air infiltration from the outside and heat loss through convection from the inside

Inherently resistant to water vapour.

Extremely light – about 650g/m2 for a 100 mm thickness – therefore easy to carry and install

Classified A+ for internal air quality according to ISO 16000

Efficient - installation does not generate dust or fibre, so visual and respiratory protection is not required

Reduces the installation time without changing installation procedures.

Very easy to cut, manually with an insulation knife on a flat surface or with an electrical saw.

Flexible and easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression, and does not collapse once installed.


Product Price List and / or Add to Cart

Availability: These newly designed products although popular, are likely to require short lead-times.

Actis Hybris Hybrid - Honeycomb Structure - Aluminised polyester outer layers - Inner core of triangular shaped polyethylene foam layers


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 50mm, 32 x (4 x 1.2x1.145m) = 175.87m² - start at £541.33
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 60mm, 17 x (6 x 1.2x1.145m) = 140.15m² - start at £516.15
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 75mm, 21 x (6 x 1.2x1.145m) = 173.12m² - start at £798.37
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 90mm, 4 x 1.2x1.145m = 5.5m² - start at £30.36
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 105mm, 4 x 1.2x1.145m = 5.5m² - start at £35.47
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 125mm, 2 x 1.2x1.145m = 2.75m² - start at £21.12
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 140mm, 25 x (2 x 1.2x1.145m) = 68.7m² - start at £589.86
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 155mm, 23 x (2 x 1.2x1.145m) = 63.2m² - start at £601.34
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 170mm, 18 x (2 x 1.2x1.145m) = 49.46m² - start at £516.01
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 185mm, 18 x (2 x 1.2x1.145m) = 49.46m² - start at £561.95
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 205mm, 17 x (2 x 1.2x1.145m) = 46.72m² - start at £587.84
Common product, generally held by all depots Generic Aluminised Tape, 100mm x 45m = 45lm - start at £7.60

Actis Hybris - Price and Availability Advisory

Please note that if these products are ordered as part of a larger order, there is a minimum spend requirement of £250 ex-VAT on these non-stock items, because they are delivered from a remote location.
The larger order made up of normal stock-items must achieve an additional minimum spend of £500+ excluding VAT

Presently there are no availability restrictions, apart from manufacturing lead-times and minimum quantity order levels on certain product sizes.
Please observe the 'Star Rating' indicators to assess availability.

Product availability indicators

Excellent = Product Availability Excellent Good = Product Availability Good Fair = Product Availability Fair Poor =  Product Availability Poor Undetermined = Product Availability Undetermined
Availability relies on stock levels at closest depots and upon transport logistics to effect deliveries


Technical Data

Actis Boost'R Breather Membrane - Multi-Foil Hybrid

Property
Test method
Declared Value
Thickness  EN 823 30 to 300mm every 15
Weight per m3 EN 1602 <7 kg/m3
Length EN 822 1,7 m (300mm-thick) to 11,7 m (45mm-thic
Width
600/1200 mm

Declared  Emissivity  (Outer/Inner  Side)  After  Ageing 

0.05 / 0.10
Tensile  Strength EN 16012
Longitudinal Direction  EN 1608 >50 kPa
Transversal Direction
>40 kPa
Resistance  To  Tearing,  Nail  Shank

Longitudinal Direction  EN  12310-1 part 1 >150 N
Transversal Direction
>150 N
Peel Strength Of Tape EN 11339 22 N/100 mm
Tensile Strength Parallel To Faces Of The Tape Water    EN 1608 116 N/100 mm
Vapour   Transmission

Permeability (W) EN 12572 set C <0,8 E-12 Kg/m2.s.Pa
Vapour Resistance (Z)
>1100 MNs/g
Diffusion Eq. Air Layer Thickness (Sd)
>200 m
Water-tightness 
Watertight
Air Permeability 
Airtight 
Fire  Resistance
Class F

After Ageing


Tensile  Strength

Longitudinal Direction  EN 1608 74 N/50mm
Transversal Direction
52 N/50 mm
Resistance  To  Tearing,  Nail  Shank

Longitudinal Direction  EN 12310-1 part 1 199 N
Transversal Direction
188 N
Peel Strength Of Tape EN 11339 At 98 N/100 mm, the Hybris surface is torn
Tensile Strength Parallel To Faces Of The Tape EN 1608 132 N/100 mm

Product Information and Certification

Links to manufacturer's information. Click to download in a separate browser window.

Actis Hybris Datasheet | Actis Hybris Certification | Actis Hybrid Products Overview


Product Certification:

Actis Hybris has been tested in a laboratory according to the following EN standards ...
EN 12667: «Thermal performance of building materials - Determination of thermal resistance – Heat flow meter method - Products of high and medium thermal resistance»

EN ISO 6946: «Building components and building elements Thermal resistance and thermal transmittance - Calculation method»


Product Performance

Actis Hybris provides dual performance with a core effective thermal conductivity (as low as 0,032 W/m.K lambda, according to EN 12667 Annex A)

Hybris provides a thermal resistance as high as R=9.05 m2.K/W, and the insulation helps to keep the fabric element to a minimum thickness and saves space,

With 105 mm and 2 air gaps, in walls it can achieve an R-value as high as 4,55 m2.K/W. And, with the additional resistance due to the air gaps it is possible to reduce the thickness of the material needed and consequently save money.

Hybris Declared Thermal Resistance (m2.K/W) in Roofs

Thickness

Core R-Value

R-Value with 1 air gap on warm side

R-Value with ...
two air gaps,
1 side unventilated,
1 side ventilated

30mm 0,90 1,30 1,80
45mm 1,35 1,80 2,25
60mm 1,80 2,25 2,75
75mm 2,25 2,75 3,25
90mm 2,70 3,20 3,70
105mm 3,15 3,65 4,20
120mm 3,60 4,10 4,65
135mm 4,05 4,60 5,15
150mm 4,50 5,05 5,60
165mm 5,00 5,55 6,10
180mm 5,45 6,00 6,60
195mm 5,90 6,50 7,05
210mm 6,35 6,95 7,50
225mm 6,80 7,40 8,00
240mm 7,25 7,85 8,45
255mm 7,70 8,30 8,90
270mm 8,15 8,75 9,35
285mm 8,60 9,20 9,80
300mm 9,05 9,70 10,25
Details of the calculated configuration:
  • Air cavities: 20 mm
  • Low emissivity (int / ext): 0,05 / 0,10 • Heat flow direction: upward vertical flow
  • Temperature difference (Tint / Text): 20°C / 0°C
  • Hybris core thermal resistance according to VTT certificate
  • Thermal performance of air gaps according to EN 6946.

Hybris Declared Thermal Resistance (m2.K/W) in Walls

Thickness

Core R-Value

R-Value with 1 air gap on warm side

R-Value with 2 air gaps

R-Value with ...
two air gaps, when using foil-backed plasterboard

30mm 0,90 1,50 2,10 2,15
45mm 1,35 1,95 2,60 2,65
60mm 1,80 2,45 3,10 3,15
75mm 2,25 2,90 3,60 3,65
90mm 2,70 3,40 4,05 4,15
105mm 3,15 3,85 4,55 4,60
120mm 3,60 4,30 5,00 5,10
135mm 4,05 4,80 5,50 5,55
150mm 4,50 5,25 5,95 6,00
165mm 5,00 5,75 6,45 6,55
180mm 5,45 6,20 6,90 7,00
195mm 5,90 6,65 7,35 7,45
210mm 6,35 7,10 7,80 7,90
225mm 6,80 7,55 8,25 8,35
240mm 7,25 8,00 8,70 8,80
255mm 7,70 8,45 9,15 9,25
270mm 8,15 8,90 9,60 9,70
285mm 8,60 9,35 10,05 10,15
300mm 9,05 9,80 10,50 10,60

Details of the calculated configuration:

  • Air cavities: 25 mm
  • Low emissivity (int / ext): 0,05 / 0,10
  • Heat flow direction: horizontal
  • Temperature difference (Tint / Text): 20°C / 0°C
  • Hybris core thermal resistance according to VTT certificate
  • Thermal performance of air gaps according to EN 6946.

Emissivity

  • The emissivity is determined on the 2 external films of the HYBRIS according to EN 16012.
  • The emissivity of the outer Metalised face after the ageing test is 0.035.
  • The fractile value of emissivity is 0.043, representing at least 90% of the production with a confidence level of 90%.
  • The declared value of emissivity is 0.05.

After ageing

  • The emissivity of the inner face after the ageing test is 0.0927.
  • The fractile value of emissivity is 0.0997, representing at least 90% of the production with a confidence level of 90%.
  • The declared value of emissivity is 0.10.


Priced on Application:

Generally, Products are readily available

Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.

Contact us directly for further information: Telephone 0333 8000 828  - Email: Click Here:


Contact Manufacturer

Actis Insulation Limited

Unit 1 Cornbrash Park - Bumpers Way, Bumpers Farm Industrial Estate,
Chippenham Wilts - SN14 6RA

Telephone: +44 (0) 249 462 888 - Fax. +44 (0) 1249 446 345
Email: solutions@actis-isolation.com
Web site: www.insulation-actis.com

Contact us

Insulation Online Limited

27 Massetts Road, Horley, Surrey, RH6 7DQ, UK

Telephone: 0333 8000 828

Facsimile: 0333 7000 797

Email: enquiries@insulation-online.com

Web site: www.insulation-online.com

insulation-online.com - we always deliver top quality products, competitive pricing and an efficient caring service