Actis Triso 10, Tri Iso Sols, Hybris, BoostR, HControl Hybrid

Minimum order £500.00 Ex-VAT - Delivery Vehicle Access: 28 ton curtain-sided lorry off-load requirement.

    Shopping Basket

    Basket Items =

    Basket Total =

    Including VAT=

Actis Insulation - Innovative Multi-foil and Hybrid Products

ACTIS has been developing environmentally friendly insulation products since 1980.
Since that time it has introduced the Actis Triso Super 9 the original multi-foil reflective insulation product ... now improved and branded Actis Super 10 Plus.

Actis recently launched a range of hybrid reflective insulation products that have been tested to international harmonised standards, both under laboratory and real conditions of use ... assuring confidence that the designed thermal expectations can be actually achieved.

Each of the hybrid products can be used in walls and roofs, separately or together to provide a total insulation system.
Actis Hybris is an innovative reflective multi-foil insulation product based on a honeycomb structure that is made of shaped polyethylene foams glued to aluminium coated polyethylene foils.

Actis Boost'R is a reflective breathable membrane with an excellent built-in thermal performance for use on the cold side of the building fabric in roofs and walls

Actis H'Control is a vapour control insulation that provides dual properties within a single product, a vapour control layer plus an Insulation.

Finally, there is Actis Triso Sols, a seven millimetre multi-foil that Actis claims will uniformly reflect the heat generated by hot water under floor heating systems. Actis further states that Triso Sols can be used to eliminate thermal bridging at the floor edges, as well as reducing linear heat loss, and helping to reduce impact noise.

Actis Triso Super 10 Plus - Pitched Roof and Walls Multi-Foil

Actis Logo - Innovative Heat Reflecting Multi-Foil Insulation

The original multi-foil insulation - now improved. This product is effective in both summer and winter for Roofs, over rafter and under rafter, and for walls inside structure. In winter, it retains heat within buildings by reflecting infra-red energy back into the property. In summer, it reflects radiation out of the property, preventing overheating of attic rooms, for example.

Although certified as the equivalent of 210mm of mineral wool by BM TRADA Certification, we recommend that Building Control approval is sought prior to purchase and installation.

Actis Triso Super 10+ Multi-Foil - Uncompressed thickness = 35mm - Aluminised polyester outer layers - Components = 19

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Common product, generally held by all depots Actis Triso Super 10 + 35mm, 1.6x10m = 16m² - start at £181.59
Common product, generally held by all depots Generic Aluminised Tape, 100mm x 45m = 45lm - start at £6.07

Actis Triso Sols - Underfloor Multi-Foil

Actis Logo - Innovative Heat Reflecting Multi-Foil Insulation

Designed for under floor, and wet system underfloor heating applications, Actis claim this product uniformly reflects the heat generated by hot water under floor heating systems. Actis further states that Triso Sols eliminates thermal bridging at floor edges (because the insulation product can be turned up the walls at the perimeters) as well as reducing linear heat loss, and helps reduce impact noises. It can be used under a screed, with or without hot water underfloor heating, either on its own or laid over another insulation product.

Actis Triso Sols Under-floor Multi-Foil - Uncompressed thickness = 7mm - Aluminised polyester outer layers - Components = 13

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Rarely requested product sourced directly, possibly manufactured to order. Actis Triso Sols 7mm, 12 x 1.6x12.5m = 240m² - start at £2,530.63
Common product, generally held by all depots Generic Aluminised Tape, 100mm x 45m = 45lm - start at £6.07

Actis Hybris - Roof and Wall Hybrid

Actis Logo - Innovative Heat Reflecting Multi-Foil Insulation

Actis Hybris is the latest insulation innovation for pitched roof, ceiling, and timber frame or masonry wall applications. This exciting new innovative reflective insulation product is designed and manufactured on a honeycomb structure made of shaped polyethylene foams bonded to aluminium coated polyethylene foils. Exceptional thermal performance is created by the special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement.

The low emissivity external films in Actis Hybris provide additional thermal resistance, when associated with air cavities. Hybris is available in rolls 1200mm wide and in a range of thickness’s from 30mm to 300mm every 15mm.

Actis Hybris Hybrid - Honeycomb Structure - Aluminised polyester outer layers - Inner core of triangular shaped polyethylene foam layers

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 50mm, 32 x (4 x 1.2x1.145m) = 175.87m² - start at £644.13
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 60mm, 17 x (6 x 1.2x1.145m) = 140.15m² - start at £614.66
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 75mm, 21 x (4 x 1.2x1.145m) = 115.42m² - start at £632.75
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 90mm, 4 x 1.2x1.145m = 5.5m² - start at £36.19
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 105mm, 4 x 1.2x1.145m = 5.5m² - start at £41.64
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 125mm, 2 x 1.2x1.145m = 2.75m² - start at £24.70
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 140mm, 25 x (2 x 1.2x1.145m) = 68.7m² - start at £690.74
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 155mm, 23 x (2 x 1.2x1.145m) = 63.2m² - start at £705.47
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 170mm, 18 x (2 x 1.2x1.145m) = 49.46m² - start at £604.02
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 185mm, 18 x (2 x 1.2x1.145m) = 49.46m² - start at £657.67
Rarely requested product sourced directly from manufacturer. Actis Hybris Panel 205mm, 17 x (2 x 1.2x1.145m) = 46.72m² - start at £688.27
Common product, generally held by all depots Generic Aluminised Tape, 100mm x 45m = 45lm - start at £6.07

Actis HControl Hybrid - Roof, Wall and Floor complementary thermal insulation

Actis Logo - Innovative Heat Reflecting Multi-Foil Insulation

HControl Hybrid is a reflective vapour control layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings. HControl Hybrid is a reflective vapour control layer that also provides complementary thermal insulation performance due to it’s thermal resistance and reflective surfaces. The product consists of 20 separate elements, made up of two coated metal reinforced polyolefin films, eight coated metal polyolefin films, six polyolefin foams and four layers of polyester wadding.

Actis HControl Hybrid Multi-Foil - Uncompressed thickness = 45mm - Coated metal reinforced polyolefin film - Components = 20

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Less popular product commonly available at selected depots. Actis HControl Hybrid 45mm, 1.6x6.25m = 10m² - start at £67.89
Common product, generally held by all depots Generic Aluminised Tape, 100mm x 45m = 45lm - start at £6.07

Actis BoostR Reflective Breather Membrane - Roof and Wall Hybrid

Actis Logo - Innovative Heat Reflecting Multi-Foil Insulation

Actis Boost’R Hybrid is an entirely new concept - a reflective breathable membrane with an excellent built-in thermal performance for use on the cold side of the building fabric in roofs and walls. It offers dual properties within a single product: A heat reflecting breathable membrane plus a thermal insulant that allows a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the required U Value. It can be used in conjunction with any type of insulation.

Actis BoostR Reflective breathable membrane - Uncompressed thickness = 35mm - Aluminised polyester outer layers - Components = 9

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Our Prices are currently being revised – please contact us for the latest prices

Common product, generally held by all depots Generic Aluminised Tape, 100mm x 45m = 45lm - start at £6.07

Product availability indicators

Price and Availability Advisory: Actis Range of Reflective Insulation Products

Please note that if these products are ordered as part of a larger order, there is a minimum spend requirement of £250 ex-VAT on these non-stock items, because they are delivered from a remote location.
The larger order made up of normal stock-items must achieve an additional minimum spend of £500+ excluding VAT

Presently there are no availability restrictions, apart from manufacturing lead-times and minimum quantity order levels on certain product sizes. Observe the 'Star Rating' indicators to assess availability.

Excellent = Product Availability Excellent Good = Product Availability Good Fair = Product Availability Fair Poor = Product Availability Poor Undetermined = Product Availability Undetermined
Availability relies on stock levels at closest depots and upon transport logistics to effect deliveries


Priced on Application:

Actis products are generally readily available.

Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.

Contact us directly for further information: Telephone 0333 8000 828  - Email: Click Here:


Contact Manufacturer

Actis Insulation Limited

Unit 1 Cornbrash Park - Bumpers Way, Bumpers Farm Industrial Estate, Chippenham Wilts - SN14 6RA

Telephone: +44 (0) 249 462 888 - Fax. +44 (0) 1249 446 345
Email: solutions@actis-isolation.com
 Web site: www.insulation-actis.com

Contact us

Insulation Online Limited

Sales Office only:39 Normandy Road, Worthing, West Sussex, BN14 7DX, UK

Telephone: 0333 8000 828

Email: enquiries@insulation-online.com

Web site: www.insulation-online.com

insulation-online.com - we always deliver top quality products, competitive pricing and an efficient caring service