Minimum order £500.00 Ex-VAT - Delivery Vehicle Access: 28 ton curtain-sided lorry off-load requirement.

    Shopping Basket

Gyproc Plasterboards and Thermal Laminate wallboards

Gyproc ThermaLine Insulated Plasterboard Thermal Laminates

The Gyproc performance range of plasterboard, thermal laminates have been developed to provide additional performance in the key areas of fire, acoustics, thermal, impact resistance and moisture resistance, for a wide range of demanding lining applications.

Gyproc Thermaline High Performance Insulated WallboardsGyproc ThermaLine Insulated Plasterboards comprise Gyproc WallBoard laminated to a layer of thermal insulating material, enabling a high quality wall finish and an efficient thermal lining to be fitted in one simple operation.

British Gypsum has simplified its range of ThermaLine products, to allow simplicity in the choice of thermal performance board to suit your insulation needs and your budget.

The range has also been extended to give you greater selection, giving solutions to a much wider choice of high performance applications.

And, as insulation standards change thermal laminates are easy to upgrade - no post-construction filling of cavities or external cladding.

Gyproc ThermaLine thermal laminates not only deliver excellent insulation performance, but can also provide vapour control and a first-class plastering or decorating surface in one board.


Product Functions

Residential Properties

Insulating and lining masonry and timber frame external walls. ground floor and upper floor partitions in masonry and timber frame built homes, and on masonry and timber frame separating walls. Can also be used in the lining and insulation of both mid-floor and top-floor ceilings.

Commercial Buildings

The combined lining and insulation of partitions in all commercial, institutional and leisure buildings, including the interior of external walls, separating walls and ceilings at all levels

Gyproc Thermaline Basic

Designed to be used in both refurbishment and new build for walls, ceilings andreveals where a basic level of thermal insulation is required to reduce heat lossfrom buildings.

Gyproc Thermaline Plus

Designed to be used in both refurbishment and new build for walls, ceilings and reveals where a medium level of thermal insulation is required to reduce heat lossfrom buildings.

Gyproc Thermaline Super

Designed to be used in both refurbishment and new build for walls, ceilings wherea high level of thermal insulation is required to reduce heat loss from buildings aspart of our British Gypsum BBA approved systems.


Product Descriptions

Product Overview

Gyproc ThermaLine laminates are the perfect way to enhance thermal insulation.

Installation benefits Gyproc ThermaLine laminates are relatively lightweight boards. They provide internal drylining and insulation in just one fixing operation, giving faster completion times. They also provide an ideal surface for plaster skimming or jointing.Whether designed into buildings from the outset or retro-fitted in to older buildings, they provide an easy way to help comply with Building Regulations Approved Document L in England and Wales and Section 6 in Scotland.

They can also contribute towards credits in the Code for Sustainable Homes, to improve the sustainability of new housing.

Thermal laminates are relatively lightweight boards and require no additional structural support.

Completely clear cavities can be maintained - the best form of protection against rain penetration over a long period, particularly in exposed locations.

With the insulation as close to the internal surface as possible, Gyproc ThermaLine laminates provide a rapid response to intermittent heating, creating more comfortable living spaces for occupants.

The integral vapour control in Gyproc ThermaLine Plus and Super reduce the risk of condensation.

Gyproc ThermaLine laminates can eliminate cold bridging when installed continuously over framing members or joists.

They can be used to provide additional insulation in the roof and used for room-in-the-roof applications.

Internal dry lining and insulation in just one fixing operation - meaning buildings can be completed faster.

Rapid response to intermittent heating - creating comfortable living conditions for the occupant more quickly.

Reduced risk of condensation - a key factor when designing domestic dwellings.

Wide product range to meet the Building Regulations on a variety of masonry or timber frame walls, new-build or refurbishment.

Can also contribute additional insulation to roof linings - for typical 3 storey constructions or room-in the-roof conversions

Gyproc ThermaLine Basic

provides a base level improvement in thermal insulation, which is ideal when used in combination with other insulation or where modest upgrades are required.

The range of thicknesses suits the low-level upgrades available.

Gyproc ThermaLine Plus

has added benefits, including a a higher performing insulant backing, and an integral vapour control to minimise the risk of condensation forming behind the lining.

Window reveals

The 27mm is the thinnest of the laminates with an integral vapour control, making it an ideal board to insulate around window reveals.

Timber frame constructions

The new 48mm laminate has been designed with a 12.5mm Gyproc WallBoard backing to provide 30 minutes fire resistance, ideal for use in timber frame constructions, as part of the internal wall solution.

Gyproc ThermaLine Super

is available in a wide range of thicknesses from 30mm - 90mm and provides solutions for a whole variety of constructions, including refurbishments and conversions of properties requiring substantial thermal upgrades. All boards have vapour control as standard, so provides peace of mind for all environments.



Product Information

Gyproc ThermaLine Basic

Gyproc ThermaLine Basic WallBoard factory-bonded to an expanded polystyrene insulant that is both CFC and HCFC-free - meaning zero ODP (Ozone Depletion Potential).

Gyproc ThermaLine Basic WallBoard consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The expanded polystyrene insulant is then further bonded to the finished plasterboard. Gyproc WallBoard is a plasterboard that is suitable for drylining internal surfaces.

Characteristics

Faced with ivory coloured Gyproc WallBoard. Backed with white coloured expanded polystyrene. Available in tapered edge only. Complies with EN 13950 from 1st March 2007

Thermal Conductivity: WallBoard 0.19W/mK

Thermal Conductivity: Basic expanded polystyrene 0.040W/mK

Applications

Can be used in both refurbishment and new-build where a basic level of additional thermal insulation is required.

Board Colour

Ivory face paper White coloured expanded polystyrene backing

Board printing

Face - screw centre markings ‘x’. Edge - product code, EAN number, board thickness x width x length, edge type. Reverse - none.

Gyproc Thermaline Plus Expanded Polytyrene Thermal Laminate Board Properties

ThermaLine Basic 22mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200

2400

6.5

T

0.35

ThermaLine Basic 30mm Board

Width

Length

Weight

Edge

Thermal resistance

mm mm kg/m² T/S m²K/W
1200 2400 7.2 T 0.55

ThermaLine Basic 40mm Board

Width

Length

Weight

Edge

Thermal resistance

mm mm kg/m² T/S m²K/W
1200 2400 8.1 T 0.80

Gyproc ThermaLine Plus

Gyproc ThermaLine Plus WallBoard factory-bonded to an extruded polystyrene insulant that is both CFC and HCFC-free - meaning zero ODP (Ozone Depletion Potential). The closed cell structure of the foam provides integral vapour control.

ThermaLine Plus WallBoard consists of an aerated gypsum core encased in, and firmly bonded to strong paper liners. The extruded polystyrene insulant is then further bonded to the finished plasterboard. Gyproc WallBoard is a plasterboard that is suitable for drylining internal surfaces.

Characteristics

Faced with ivory coloured Gyproc WallBoard. Backed with orange coloured extruded polystyrene. Available in tapered edge only. Complies with EN 13950 from 1st March 2007

Thermal Conductivity: WallBoard 0.19W/mK

Thermal Conductivity: Plus extruded polystyrene 0.030W/mK

Applications

Suitable for new buildings and for upgrading existing buildings when mid to high thermal performance is required.

Board colour

Ivory face paper Orange coloured extruded polystyrene backing

Board printing

Face - screw centre markings ‘x’. Edge - product code, EAN number, board thickness x width x length, edge type. Reverse - none.

Gyproc Thermaline Plus Extruded Polytyrene Thermal Laminate Board PropertiesThermaLine Plus 27mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200

2400 6.5 T 0.63

ThermaLine Plus 35mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 7.2 T 0.88

ThermaLine Plus 40mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 7.7 T 1.07

48mm Board (faced with 12.5mm Gyproc WallBoard)

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 8.1 T 1.25

Gyproc ThermaLine Super

Gyproc Thermaline Thermaline Super wallboard factory-bonded to CFC and HCFC-free high thermal performance phenolic foam insulant, meaning zero ODP (Ozone Depletion Potential). It has good fire performance, with Class 0 rating to both faces. Also has low toxicity and smoke obscuration of less than 5%. Includes a vapour control layer as standard to reduce risk of condensation.

Gyproc Thermaline Thermaline Super consists of an aerated gypsum core encased in, and firmly bonded to strong paper liners. The phenolic foam insulant is then further bonded to the finished plasterboard. Gyproc WallBoard is a plasterboard that is suitable for drylining internal surfaces.

Characteristics

Faced with ivory coloured Gyproc WallBoard. Backed with brown coloured phenolic foam. Available in tapered edge only. Complies with EN 13950 from 1st March 2007

Thermal Conductivity: WallBoard 0.19W/mK

Thermal Conductivity: Super phenolic foam 0.022W/mK to 0.024W/mK
(dependent on thickness of foam)

Applications

A very high performing, yet cost-effective, thermal laminate used for refurbishment and room-in-the-roof applications where a substantial upgrade in thermal insulation is required.

Board colour

Ivory face paper - brown coloured phenolic foam backing

Board printing

Face - screw centre markings 'x'. Edge - product code, EAN number, board thickness x width x length, edge type. Foam edge - Gyproc ThermaLine SUPER.

Gyproc Thermaline Super Phenolic Foam Thermal Laminate Board Properties50mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 6.5 T 1.97

60mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 6.6 T 2.56

70mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 6.7 T 3.06

80mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 6.8 T 3.56

90mm Board

Width

Length

Weight

Edge

Thermal resistance

mm

mm

kg/m²

T/S

m²K/W

1200 2400 6.9 T 4.06

Product Installation

It is important to observe appropriate health and safety legislation when working on site i.e. personal protective clothing and equipment, etc. The following notes are intended as general guidance only. In practice, consideration must be given to design criteria requiring specific project solutions.

Handling

Manual off-loading of this product should be carried out with care to avoid unnecessary strain. For further information please refer to the Manual Handling section of the 'Site Book' or 'Manual Handling Guide', available to download from www.british-gypsum.com

Cutting

This product may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge. Holes for switch or socket boxes should be cut out before the boards are fixed using a utility saw or sharp knife. When cutting boards, power and hand tools should be used with care and in accordance with the manufacturers’ recommendations. Power tools should only be used by people who have been instructed and trained to use them safely. Appropriate personal protective equipment should be used.

Fixing

Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges. Position cut edges to internal angles whenever possible, removing paper burrs with fine sandpaper. Stagger horizontal and vertical board joints between layers by a minimum of 600mm. Locate boards to the centre line of framing where this supports board edges or ends.


Product Price List and / or Add to Cart

Gyproc Specialist and insulated Plasterboard Thermal LaminatesAvailability: Very popular products readily available throughout the country.

Gyproc British Gypsum Standard Plasterboards

Gyproc Standard Plasterboards - Straight Edge (SE) and Tapered Edge (TE)

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Common product, generally held by all depots Gyproc Plank (SE) 19mm, 0.6x2.4m = 1.44m² - start at £6.72
Rarely requested product sourced directly from manufacturer. Gyproc Wallboard (SE) 9.5mm, 1.2x2.4m = 2.88m² - start at £5.97
Common product, generally held by all depots Gyproc Wallboard (SE) 12.5mm, 1.2x2.4m = 2.88m² - start at £6.00
Common product, generally held by all depots Gyproc Wallboard (SE) 15mm, 1.2x2.4m = 2.88m² - start at £7.48
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 9.5mm, 0.9x1.8m = 1.62m² - start at £3.98
Common product, generally held by all depots Gyproc Wallboard (TE) 9.5mm, 1.2x2.4m = 2.88m² - start at £6.00
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 12.5mm, 0.9x1.8m = 1.62m² - start at £3.91
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 12.5mm, 0.9x2.4m = 2.16m² - start at £5.21
Common product, generally held by all depots Gyproc Wallboard (TE) 12.5mm, 1.2x2.4m = 2.88m² - start at £6.00
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 12.5mm, 1.2x2.7m = 3.24m² - start at £6.75
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 12.5mm, 1.2x3m = 3.6m² - start at £7.49
Rarely requested product sourced directly from manufacturer. Gyproc Wallboard (TE) 15mm, 0.9x1.8m = 1.62m² - start at £4.95
Rarely requested product sourced directly from manufacturer. Gyproc Wallboard (TE) 15mm, 0.9x2.4m = 2.16m² - start at £6.60
Common product, generally held by all depots Gyproc Wallboard (TE) 15mm, 1.2x2.4m = 2.88m² - start at £7.48
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 15mm, 1.2x2.7m = 3.24m² - start at £8.41
Less popular product commonly available at selected depots. Gyproc Wallboard (TE) 15mm, 1.2x3m = 3.6m² - start at £9.35

Gyproc British Gypsum Application Specific Plasterboards

Gyproc Application Specific Wallboards - Duplex Vapour, Moisture, Fire, and Sound Resistant

Fuller details of this product are available: Click Here.


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Less popular product commonly available at selected depots. Gyproc Duplex Wallboard (SE) 12.5mm, 0.9x1.8m = 1.62m² - start at £6.34
Common product, generally held by all depots Gyproc Duplex Wallboard (TE) 12.5mm, 1.2x2.4m = 2.88m² - start at £9.78
Less popular product commonly available at selected depots. Gyproc Duplex Wallboard (TE) 12.5mm, 1.2x3m = 3.6m² - start at £12.23
Common product, generally held by all depots Gyproc Duplex Wallboard (TE) 15mm, 1.2x2.4m = 2.88m² - start at £11.70
Common product, generally held by all depots Gyproc Moisture Resistant Wallboard (TE) 12.5mm, 1.2x2.4m = 2.88m² - start at £10.51
Less popular product commonly available at selected depots. Gyproc Moisture Resistant Wallboard (TE) 12.5mm, 1.2x2.7m = 3.24m² - start at £11.82
Less popular product commonly available at selected depots. Gyproc Moisture Resistant Wallboard (TE) 12.5mm, 1.2x3m = 3.6m² - start at £13.13
Common product, generally held by all depots Gyproc Moisture Resistant Wallboard (TE) 15mm, 1.2x2.4m = 2.88m² - start at £12.56
Less popular product commonly available at selected depots. Gyproc Fireline Duplex Wallboard (TE) 12.5mm, 1.2x2.4m = 2.88m² - start at £13.50
Less popular product commonly available at selected depots. Gyproc Fireline Wallboard (TE) 12.5mm, 0.9x1.8m = 1.62m² - start at £5.15
Common product, generally held by all depots Gyproc Fireline Wallboard (TE) 12.5mm, 1.2x2.4m = 2.88m² - start at £7.95
Less popular product commonly available at selected depots. Gyproc Fireline Wallboard (TE) 12.5mm, 1.2x2.7m = 3.24m² - start at £8.95
Less popular product commonly available at selected depots. Gyproc Fireline Wallboard (TE) 12.5mm, 1.2x3m = 3.6m² - start at £9.94
Less popular product commonly available at selected depots. Gyproc Fireline Wallboard (TE) 15mm, 0.9x1.8m = 1.62m² - start at £6.34
Common product, generally held by all depots Gyproc Fireline Wallboard (TE) 15mm, 1.2x2.4m = 2.88m² - start at £9.56
Less popular product commonly available at selected depots. Gyproc Fireline Wallboard (TE) 15mm, 1.2x2.7m = 3.24m² - start at £10.75
Less popular product commonly available at selected depots. Gyproc Fireline Wallboard (TE) 15mm, 1.2x3m = 3.6m² - start at £11.95
Common product, generally held by all depots Gyproc Soundbloc (TE) 12.5mm, 1.2x2.4m = 2.88m² - start at £9.25
Less popular product commonly available at selected depots. Gyproc Soundbloc (TE) 12.5mm, 1.2x2.7m = 3.24m² - start at £10.40
Less popular product commonly available at selected depots. Gyproc Soundbloc (TE) 12.5mm, 1.2x3m = 3.6m² - start at £11.56
Common product, generally held by all depots Gyproc Soundbloc (TE) 15mm, 1.2x2.4m = 2.88m² - start at £11.26
Less popular product commonly available at selected depots. Gyproc Soundbloc (TE) 15mm, 1.2x2.7m = 3.24m² - start at £12.67
Less popular product commonly available at selected depots. Gyproc Soundbloc (TE) 15mm, 1.2x3m = 3.6m² - start at £14.08


Price and Availability Advisory

Presently there are no availability restrictions. Always observe the 'Star Rating' indicators to assess availability.

Product availability indicators

Excellent = Product Availability Excellent Good = Product Availability Good Fair = Product Availability Fair Poor =  Product Availability Poor Undetermined = Product Availability Undetermined
Availability relies on stock levels at closest depots and upon transport logistics to effect deliveries


Technical Data

The thermal properties of building materials and building elements are defined most commonly by terms and symbols as described below:

Thermal conductivity (λ - Lambda value)

(l) This is a measure of a material’s ability to transmit heat, and is expressed as heat flow in watts per m2 of surface area for temperature gradient of one Kelvin (K) per metre thickness. It is expressed as W/mK.

Generally, dense materials have high thermal conductivity and are inefficient thermal insulants, whereas lightweight materials have low conductivity and can be efficient thermal insulants.

The lower the (λ - thermal conductivity) value of a material, the better is its insulating efficiency.

Thermal resistance (R)

This is the measure of the resistance to the passage of heat offered by the thickness of a material and is expressed as m2K/W.

The thermal resistance of a material is obtained by the following calculation ...

R = t (thickness in metres) divided by λ (thermal conductivity)

The higher the resistance of the element the better is its insulating efficiency.

Thermal transmittance (U Value)

The U Value of a building element is a property of its whole construction, including airspaces, and is the measure of its ability to transmit heat under steady state conditions. It is calculated by adding the reciprocal sum of all the individual thermal resistances and is expressed as W/m2K.

The lower the U Value of the element, the better its thermal insulation properties.


Product Installation

It is important to observe appropriate health and safety legislation when working on site i.e. personal protective clothing and equipment, etc. The following notes are intended as general guidance only. In practice, consideration must be given to design criteria requiring specific project solutions.

Handling

Manual off-loading of this product should be carried out with care to avoid unnecessary strain. For further information please refer to the Manual Handling section of the 'Site Book' or 'Manual Handling Guide', available to download from www.british-gypsum.com

Cutting

This product may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge. Holes for switch or socket boxes should be cut out before the boards are fixed using a utility saw or sharp knife. When cutting boards, power and hand tools should be used with care and in accordance with the manufacturers’ recommendations. Power tools should only be used by people who have been instructed and trained to use them safely. Appropriate personal protective equipment should be used.

Fixing

Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges. Position cut edges to internal angles whenever possible, removing paper burrs with fine sandpaper. Stagger horizontal and vertical board joints between layers by a minimum of 600mm. Locate boards to the centre line of framing where this supports board edges or ends.


Product Information

Links to manufacturer's information. Click to download in a separate browser window.

Gyproc ThermaLine Basic Datasheet | Gyproc ThermaLine Plus Datasheet | Gyproc ThermaLine Super Datasheet


Priced on Application:

Generally, products are readily available

Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.

Contact us directly for further information: Telephone 0333 8000 828  - Email: Click Here:


Contact Manufacturer

Gyproc Specialist and insulated Plasterboard Thermal Laminates

British Gypsum Limited (Gyproc)

Drywall Academy Advice Centre, East Leake, Loughborough, Leicestershire LE12 6JT
Telephone: +44 (0) 115 945 1000

British Gypsum Technical Advisory Service.

Telephone: +44 844 800 1991
Email: bgtechnical.enquiries@bpb.com
Web sites: Gyproc Home Page

Contact us

Insulation Online Limited

27 Massetts Road, Horley, Surrey, RH6 7DQ, UK

Telephone: 0333 8000 828

Facsimile: 0333 7000 797

Email: enquiries@insulation-online.com

Web site: www.insulation-online.com

insulation-online.com - we always deliver top quality products, competitive pricing and an efficient caring service