Minimum order £500.00 Ex-VAT - Delivery Vehicle Access: 28 ton curtain-sided lorry off-load requirement.

    Shopping Basket


YBS Reflecting Insulation and Eco Products

YBS Foil-Tec - Single Foil Laminate

YBS Foiltec the BBA certified single foil laminate reflective insulation for ground floor applications

YBS Airtec Single Bubble, Double Bubble, Single Foil, or Double Foil

Product Functions - Solid & Suspended Floors

Foil-Tec Single is a BBA Certified multi-layer foil laminate, coated with nitrocellulose to provide a corrosion resistant insulation system that provides improved thermal performance.

Foil-Tec Single is a high-performance material that works by creating a low emissivity air space below the floor, thus reflecting the heat back.

Product Properties

Foil-Tec Single can be applied to enhance ‘U’ values in new build or refurbished building projects to meet and exceed current Building Regulations.

Foil-Tec Single is better suited to concrete floor applications.

Foil-Tec Double is similar to Foiltec Single, but with foil on both outside facings, and is better suited to suspended timber floor applications.

Foiltec — Technical Specifications

Fire Properties

Foil face meets Class 1

Thermal Resistance of 50mm cavity

1.327 M²K/W

Environmental

CFC & HCFC Free

Dimensions

Thinkness

less than 1mm


Width

1m, 1.5m


Length

50m roll


Product Price List and / or Add to Cart

Availability: Popular product readily available throughout the country.

Buying YBS Foil-tec Products:

YBS products are ‘non-stock items’ - delivered directly from the manufacturer or their distributor. While this does not necessarily add to delivery lead times, it does impact minimum order levels and related delivery costs.”

In the case of a combined order to include 'non-stock' items such as YBS, we require a minimum order of £250.00, in addition to a ‘stock items’ order to a value of £500.00 or more, this equates to a total minimum order size of £750.00. (Prices exclude VAT)

Price List: YBS FoilTec - Reflecting Foil Laminate - Thickness = <1mm


1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Less popular product commonly available at selected depots. YBS Foiltec Double 2mm, 1.5x50m = 75m² - start at £117.29
Less popular product commonly available at selected depots. YBS Foiltec Double 2mm, 1x50m = 50m² - start at £78.95
Less popular product commonly available at selected depots. YBS Foiltec Single 1mm, 1.5x50m = 75m² - start at £101.90
Less popular product commonly available at selected depots. YBS Foiltec Single 1mm, 1x50m = 50m² - start at £67.07

Less popular product commonly available at selected depots. YBS Aluminised Tape, 75mm x 50m = 50lm - start at £5.91
Less popular product commonly available at selected depots. YBS BreatherQuilt double-sided tape, 50mm x 50m = 50lm - start at £8.64
Less popular product commonly available at selected depots. YBS BreatherQuilt jointing tape, 70mm x 50m = 50lm - start at £8.64

YBS Foiltec - Price and Availability Advisory

Presently there are no availability restrictions. Always observe the 'Star Rating' indicators to assess availability.

Buying YBS Foiltec Products:

YBS Foiltec products are ‘non-stock items’ - delivered directly from the manufacturer or their distributor. While this does not necessarily add to delivery lead times, it does impact minimum order levels and related delivery costs.”

In the case of a combined order to include 'non-stock' items such as YBS Foiltec, we require a minimum order of £250.00, in addition to a ‘stock items’ order to a value of £500.00 or more, this equates to a total minimum order size of £750.00. (Prices exclude VAT)

Product availability indicators

Excellent = Product Availability Excellent Good = Product Availability Good Fair = Product Availability Fair Poor =  Product Availability Poor Undetermined = Product Availability Undetermined
Availability relies on stock levels at closest depots and upon transport logistics to effect deliveries


Product Functions

Foil-tec Single when used with concrete floors is rolled to 25mm x 38mm horizontal counter battens, thus creating the required air gap.

Foil-Tec General Floor Applications

  • Foil-Tec Single is rolled out onto concrete floor with shiny side facing upwards - leaving enough edge overlap for 75mm lip to be left behind skirting.
  • Timber battens/joists (min 50mm x 50mm) are then laid on top of the Foil-Tec Single, spaced at centres to suit the particular flooring.
  • The decking is then fixed with screws (at 200mm centres) into battens/joists providing 25mm penetration into the 50mm wide battens/joists

Installation in suspended floor applications

  • Foil-Tec Single is rolled out with the shiny sidefacing upwards, over the joists
  • Foil-Tec Single is then nailed in place through the Foil-Tec Saddle Clips to maintain required air gap - 4- per m²
  • The horizontal joints are overlapped by 100mm and are left open to allow any moisture accumulation to dissipate

Foil-Tec Single must be brought up (behind the skirting board) to 75mm Foiltec is seals the floor and wall upstands to provide effective insulation.The decking is then fixed with screws (at 200mm centres) 37mm into the joists

Joist End Fitting Recommendations

  • Make 2 x 75-100mm cuts in Foil-tec - same width as joist.
  • Then make one further cut, same width again, on each side.
  • Fold up flap(A), fold back flaps (B) and pull Foil-tec (C) up to meet wall.
  • Fix to wall and fit skirting board over, concealing Foil-tec.

Installation for concrete floor applications

  • Foil-Tec Single is rolled out onto concrete floor with shiny side facing upwards - leaving enough edge overlap for 75mm lip to be left behind skirting
  • Timber battens/joists (min 50mm x 50mm) are then laid on top of the Foil-Tec Single, spaced at centres to suit the particular flooring.
  • The decking is then fixed with screws (at 200mm centres) into battens/joists providing 25mm penetration into the 50mm wide battens/joists

Foil-Tec Insulation for Suspended Timber Floor ApplicationsReflecting the heat back, Foil-tec Double is a high-performance material when combined with a low emissivity air space below the floor

  • Foil-Tec Double can be used with Floorboards or Tongue & Groove floor paneling
  • Foil-Tec Double is a multi-layer foil laminate, coated with polyethylene to provide a corrosion resistant insulation system.
  • Foil-Tec Double is a high-performance material which acts creating a low emissivity air space below the floor, thus reflecting the heat back.
  • Foil-Tec Double can be applied to enhance ‘U’ values in new build or refurbished building projects to meet and exceed current Building Regulations.

Installation - Foiltec Single

  • Foil-Tec Single is rolled out with the shiny side facing upwards, over the joists
  • Foil-Tec Single is then nailed in place through the Foil-Tec Saddle Clips to main tain required air gap - 4 per m 2
  • The horizontal joints are overlapped by 100mm and are left open to allow any moisture accumulation to dissipate Foil-Tec SIngle must be brought up (behind the skirting board) to 75mm
  • The decking is then fixed with screws (at 200mm centres) 37mm into the joists

Installation - Foiltec Double

  • Foil-Tec Double is rolled out over the joists
  • Foil-Tec Double is then nailed in place through the Foil-Tec Saddle Clips to maintain required air gap - 4 per m²
  • The horizontal joints are overlapped by 100mm and are left open to allow any moisture accumulation to dissipate
  • Foil-Tec Double must be brought up (behind the skirting board) to 75mm
  • The decking is then fixed with screws (at 200mm centres) 37mm into the joists

Joist End Fitting Recommendations

  • Make 2 x 75-100mm cuts in Foil-tec - same width as joist.
  • Then make one further cut, same width again, on each side.
  • Fold up flap(A), fold back flaps (B) and pull Foil-tec (C) up to meet wall.
  • Fix to wall and fit skirting board over, concealing Foil-tec.

Product Information and Certification

Links to manufacturer's information. Click to download in a separate browser window.

YBS Foil-Tec Datasheet | YBS Foil-Tec BBA Certificate

Product Certification

  • British Board of Agrément - Certificate No. 09/4640
  • Building Regulations 2000 Approved Document LI, L2 Building Standards Part J.
  • BS EN ISO 6946 Thermal Resistance Calculation Downward Heat Flow.
  • BRE publication -Thermal Insulation: Avoiding the risks.
  • BS EN ISO 13370 - Heat Transfer via The Ground Calculation Method.

Priced on Application:

Generally, Products are readily available

Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.

Contact us directly for further information: Telephone 0333 8000 828  - Email: Click Here:


Contact Manufacturer

YBS Insulation

YBS Reflecting Insulation and Eco Products

The Crags Industrial, Park Morven Street, Creswell, Derbyshire, S80 4AJ, England
Technical Telephone: +44 (0) 871 917 0044 - Note: Tech support calls are charged at 10p per minute from a UK BT landline, other networks may vary.
Facsimile: +44 (0) 844 99 100 55
Email: technical@ybsinsulation.com
Web site: www.ybsinsulation.com

Contact us

Insulation Online Limited

27 Massetts Road, Horley, Surrey, RH6 7DQ, UK

Telephone: 0333 8000 828

Telephone: 0333 9000 989

Facsimile: 0333 7000 797

Email: enquiries@insulation-online.com

Web site: www.insulation-online.com

insulation-online.com delivering the very best products at the very best prices