Minimum order £500.00 Ex-VAT - Delivery Vehicle Access: 28 ton curtain-sided lorry off-load requirement.

    Shopping Basket

YBS SuperQuilt 40mm Multi-foil with sheet aluminium foil facings

Product Functions

SuperQuilt - 40mm - easy to fit, flexible, multi-layer insulation that offers significant thermal benefits. Unlike our other multi-foils, SuperQuilt has aluminium foil facings, rather than aluminised polyester. BDA certified, and Class 1 fire rated for surface flame spread.

YBS SuperQuilt is the ideal multi-purpose heat reflecting barrier for Flat Roofs, Pitch Roofs, Loft Insulation, Wall Insulation, Cavity Walls, Dry Lining, External Walls, Timber Frame Walls, Floor Insulation, Suspended Timber Floors, Floating Timber floors or Crawl Space and Cellars.

Installing SuperQuilt above rafters on a pitched roofSuperQuilt Multi-foil insulation is a very flexible, easy to fit, multilayer insulation that offers significant thermal benefits.

Testing in accordance with EN16012 confirms high thermal resistance of 2.70m²K/W for SuperQuilt accompanied by a 25mm air cavity either side of the material.

The introduction of a unique method of stitching reduces cold bridging commonly seen with other multi-foil insulation material.

SuperQuilt is a very flexible, easy to fit, 40mm, multi-layer insulation that offers significant thermal benefits over its competitors. Commonly, the outer layers of multi-foil insulations are made of aluminised polyester or similar, rather than aluminium foil facings.

Consequently, with its BBA Certified, FoilTec outer facings, SuperQuilt, is a reflective, robust, and safe multi-foil with a  Class 1 (BS476-1) standard for flame spread.

In situ tests have shown that SuperQuilt provides insulation equal to 270 mm of glass wool when installed in a pitched roof construction.

SuperQuilt now has full certification with Local Authority Building Control, and EEC construction products certification - a BDA Certificate.


Product Properties

Under rafter fitting of SuperQuilt Multi-foil InsulationYBS SuperQuilt multi-foil insulation is a BDA certified, easy to fit, very flexible, multi-layer insulation that offers significant thermal benefits.

Due to the special composition of multi-layers of insulation SuperQuilt effectively deals with all forms of energy transfer (i.e. conduction, convection and radiation). SuperQuilt works most effectively by reflecting infra-red radiation.

Therefore, in winter, SuperQuilt is not only highly effective at reflecting heat back into the building and keeping the cold out, but in summer Super-Quilt is a very effective barrier to over heating from solar energy reducing the need for artificial cooling systems, and preventing uncomfortable heat build up in the roof.

  • Keeps heat in during Winter, and keeps heat out during Summer
  • Light Weight – only 0.8 kilogrammes per square metre.
  • Thickness – 40mm
  • Tear Resistant - tensile strength 142 kPa
  • No special tools required
  • Easily cut with a craft knife
  • Fix to beams or battens with staple gun
  • No Protective clothing/handling required
  • Joints can be sealed with Aluminium Foil Tape
  • Reaction to fire at the surface - Class 1, reaction to fire at edges - Euroclass E
  • Easy to fit – suitable for Professional or DIY use
  • Easy to store

Product Price List and / or Add to Cart

Availability: Popular product readily available throughout the country.

Price List: YBS SuperQuilt - Uncompressed thickness = 40mm - Core = Foam + reflective layers - Outer Layers = Aluminium foil  - Components = 19

1. Click items below for pricing structure. 2. Click Tick-Box to select one or more items. 3. Click Add to Cart Button.

Less popular product commonly available at selected depots. YBS SuperQuilt 40mm, 1.5x10m = 15m² - start at £83.00
Less popular product commonly available at selected depots. YBS Aluminised Tape, 75mm x 50m = 50lm - start at £5.91
Less popular product commonly available at selected depots. YBS BreatherQuilt double-sided tape, 50mm x 50m = 50lm - start at £8.64
Less popular product commonly available at selected depots. YBS BreatherQuilt jointing tape, 70mm x 50m = 50lm - start at £8.64

YBS SuperQuilt - Price and Availability Advisory

Presently there are no availability restrictions. Always observe the 'Star Rating' indicators to assess availability.

Buying YBS SuperQuilt Products:

YBS SuperQuilt products are ‘non-stock items’ - delivered directly from the manufacturer or their distributor. While this does not necessarily add to delivery lead times, it does impact minimum order levels and related delivery costs.”

In the case of a combined order to include 'non-stock' items such as YBS SuperQuilt, we require a minimum order of £250.00, in addition to a ‘stock items’ order to a value of £500.00 or more, this equates to a total minimum order size of £750.00. (Prices exclude VAT)

Product availability indicators

Excellent = Product Availability Excellent Good = Product Availability Good Fair = Product Availability Fair Poor =  Product Availability Poor Undetermined = Product Availability Undetermined
Availability relies on stock levels at closest depots and upon transport logistics to effect deliveries


Product Benefits

YBS SuperQuilt multi-foil insulation is a BDA certified, easy to fit, very flexible, multi-layer insulation that offers significant thermal benefits.

Due to the special composition of multi-layers of insulation SuperQuilt effectively deals with all forms of energy transfer (i.e. conduction, convection and radiation). SuperQuilt works most effectively by reflecting infra-red radiation.

Therefore, in winter, SuperQuilt is not only highly effective at reflecting heat back into the building and keeping the cold out, but in summer Super-Quilt is a very effective barrier to over heating from solar energy reducing the need for artificial cooling systems, and preventing uncomfortable heat build up in the roof.

Under rafter fitting of SuperQuilt Multi-foil Insulation
  • Keeps heat in during Winter, and keeps heat out during Summer
  • Light Weight – only 0.8 kilogrammes per square metre.
  • Thickness – 40mm
  • Tear Resistant - tensile strength 142 kPa
  • No special tools required
  • Easily cut with a craft knife
  • Fix to beams or battens with staple gun
  • No Protective clothing/handling required
  • Joints can be sealed with Aluminium Foil Tape
  • Reaction to fire at the surface - Class 1, reaction to fire at edges - Euroclass E
  • Easy to fit – suitable for Professional or DIY use
  • Easy to store

Product Technical Properties

YBS SuperQuilt Description



Components 19

Thickness

40mm approx.

Weight 880g/m2

Mechanical Properties

Value

Reference Standard

Thermal performance

Core 1.52m2K/W BS EN 16012
Core +Airspaces 2.50m2K/W BS EN 6946
Flammability Class E BS EN 13501-1
Water vapour resistance 1569MNs/g BS EN 12572
Emission coefficients of surfaces 0.02 BS EN 16012
Tensile strength 142KPA BS EN 1608
Packaging 15m2 7.5m2
Width 1.5m 1.5m
Length 10m 5m
Weight 13.5Kg 6.75Kg

U Value Examples

SuperQuilt Over Rafter Pitched Roof (rafters at 400mm centres) U Value

  • SuperQuilt and 80mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 135mm Glasswool (0.040 W/mK) = 0.18 W/m2k
  • SuperQuilt and 115mm PIR (0.022 W/mk) = 0.15 W/m2k
  • SuperQuilt and 185mm Glasswool (0.040 W/mK) =0.15 W/m2k

SuperQuilt Over Rafter Pitched Roof (rafters at 600mm centres) U Value

  • SuperQuilt and 70mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 125mm Glasswool (0.040 W/mK) = 0.18 W/m2k
  • SuperQuilt and 100mm PIR (0.022 W/mk) = 0.15 W/m2k
  • SuperQuilt and 170mm Glasswool (0.040 W/mK) = 0.15 W/m2k

SuperQuilt Under Rafter Pitched Roof (rafters at 400mm centres) U Value

  • SuperQuilt and 75mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 130mm Glasswool (0.040 W/mK) = 0.18 W/m2k
  • SuperQuilt and 110mm PIR (0.022 W/mk) = 0.15 W/m2k
  • SuperQuilt and 180mm Glasswool (0.040 W/mK) = 0.15 W/m2k

SuperQuilt Under Rafter Pitched Roof (rafters at 600mm centres) U Value

  • SuperQuilt and 70mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 120mm Glasswool (0.040 W/mK) = 0.18 W/m2k
  • SuperQuilt and 95mm PIR (0.022 W/mk) = 0.15 W/m2k
  • SuperQuilt and 165mm Glasswool (0.040 W/mK) = 0.15 W/m2k

SuperQuilt Double Layer Over (rafters at 400mm centres) U Value

  • SuperQuilt (2 Layers) with 40mm insulated Plasterboard (XPS) (1.070 m2K/W) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 50mm PIR (0.022 W/mK) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 85mm Glasswool (0.044 W/mk) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 57.5mm Insulated Plasterboard (PIR) (2.2 m2K/W) =0.15 W/m2k

SuperQuilt Double Layer Under (rafters at 600mm centres) U Value

  • SuperQuilt (2 Layers) with 40mm insulated Plasterboard (XPS) (1.070 m2K/W) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 45mm PIR (0.022 W/mK) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 75mm Glasswool (0.044 W/mk) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 57.5mm Insulated Plasterboard (PIR) (2.2 m2K/W) = 0.15 W/m2k

SuperQuilt Over Joist Flat Roof (joists at 400mm centres) U Value

  • SuperQuilt and 65mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 90mm PIR (0.022 W/mk) = 0.15 W/m2k
  • SuperQuilt and 85mm XPS (0.029 W/mk) = 0.18 W/m2k
  • SuperQuilt and 120mm XPS (0.029 W/mk) = 0.15 W/m2k
  • SuperQuilt and 110mm EPS (0.038 W/mk) = 0.18 W/m2k
  • SuperQuilt and 150mm EPS (0.038 W/mk) = 0.15 W/m2k

SuperQuilt Over Joist Flat Roof (joists at 600mm centres) U Value

  • SuperQuilt and 65mm PIR (0.022 W/mk) =0.18 W/m2k
  • SuperQuilt and 90mm PIR (0.022 W/mk) = 0.15 W/m2k
  • SuperQuilt and 85mm XPS (0.029 W/mk) = 0.18 W/m2k
  • SuperQuilt and 120mm XPS (0.029 W/mk) = 0.15 W/m2k
  • SuperQuilt and 105mm EPS (0.038 W/mk) = 0.18 W/m2k
  • SuperQuilt and 145mm EPS (0.038 W/mk) = 0.15 W/m2k

SuperQuilt Under Joist Flat Roof (joists at 400mm centres) U Value

  • SuperQuilt and 140mm Mineral Wool (0.040 W/mk) = 0.18 W/m2k
  • SuperQuilt and 190mm Mineral Wool (0.040 W/mk) = 0.15 W/m2k
  • SuperQuilt and 120mm Mineral Wool (0.033 W/mk) = 0.18 W/m2k
  • SuperQuilt and 170mm Mineral Wool (0.033 W/mk) = 0.15 W/m2k
  • SuperQuilt and 90mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 120mm PIR (0.022 W/mk) = 0.15 W/m2k

SuperQuilt Under Joist Flat Roof (joists at 600mm centres) U Value

  • SuperQuilt and 130mm Mineral Wool (0.040 W/mk) = 0.18 W/m2k
  • SuperQuilt and 175mm Mineral Wool (0.040 W/mk) = 0.15 W/m2k
  • SuperQuilt and 110mm Mineral Wool (0.033 W/mk) = 0.18 W/m2k
  • SuperQuilt and 150mm Mineral Wool (0.033 W/mk) = 0.15 W/m2k
  • SuperQuilt and 80mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt and 110mm PIR (0.022 W/mk) = 0.15 W/m2k

SuperQuilt Double Layer (joists at 400mm centres) U Value

  • SuperQuilt (2 Layers) and 50mm Mineral Wool (0.040 W/mk) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 100mm Mineral Wool (0.040 W/mk) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 40mm Mineral Wool (0.033 W/mk) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 90mm Mineral Wool (0.033 W/mk) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 30mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 65mm PIR (0.022 W/mk) = 0.15 W/m2k

SuperQuilt Double Layer (joists at 600mm centres) U Value

  • SuperQuilt (2 Layers) and 50mm Mineral Wool (0.040 W/mk) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 90mm Mineral Wool (0.040 W/mk) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 40mm Mineral Wool (0.033 W/mk) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 80mm Mineral Wool (0.033 W/mk) = 0.15 W/m2k
  • SuperQuilt (2 Layers) and 25mm PIR (0.022 W/mk) = 0.18 W/m2k
  • SuperQuilt (2 Layers) and 55mm PIR (0.022 W/mk) = 0.15 W/m2k

Product Installation

Fixing details

SuperQuilt is designed to overlap each layer of insulation by 75mm and continually seal along the joints with Aluminium Foil Tape.

No special equipment is needed to install SuperQuilt. SuperQuilt can be cut with a craft knife.

SuperQuilt can easily be fixed with staples at regular intervals (Minimum staple depth is 14mm).

SuperQuilt is at the most effective with a 25mm minimum air gap on either side. Using battens can create this gap, giving you the maximum insulation benefit.

Superquilt under rafter u-vale calculation

Over Rafter Fixing

SuperQuilt is fast and simple to in-stall. With great benefits, keeping rafter depths to a minimum, light-weight and high insulation values.

SuperQuilt is rolled out over the rafters horizontally or vertically and stapled in position.

All joints are taped with YBS Foil Tape. At the eves SuperQuilt is cut around the rafters and sealed to the Cavity wall insulation or wall plate. Battens are placed parallel with the rafters and fixed.

A breather-membrane is fitted in accordance with the manufacturers fixing details, above the battens. Tile battens and tiles are then fitted.

Close boarding or plasterboard is fixed above the rafters. Counter battens are fixed parallel with the rafters through the boarding into the rafters with clout nails.

SuperQuilt is rolled out onto the counter battens horizontally or vertically and stapled in position. All joints are taped with YBS Foil Tape. At the eves SuperQuilt is cut around the rafters and sealed to the Cavity wall insulation or wall plate to create an airtight envelope.

Battens are placed on top of the SuperQuilt, parallel with the rafters and fixed in to the counter battens. A breather membrane is then fitted in accordance with the manufacturers fitting instructions. Tile battens and tiles can then be fitted.

SuperQuilt is stapled to the rafters. At the eves the SuperQuilt is cut and taken down between the rafters to the cavity wall insulation or the wall plate. The material needs to be sealed with staples and tape to the rafters and the cavity wall insulation or wall plate to create an airtight envelope.

Over Rafter Fixing Details

Where roof height is critical SuperQuilt can be recessed between the rafters.

1. SuperQuilt is stapled to the top of the first rafter.

2. SuperQuilt is recessed into the rafter void and fixed by staples or with battens.

3. The material is then fixed to opposed rafter as per instruction 2.

4. SuperQuilt is then wrapped around the rafter and the procedure starts again.

Once all the SuperQuilt is fitted all joints should be taped using YBS Foil Tape.

A breather membrane is then fitted in accordance with the manufacturers fitting instructions. Tile batten and tiles can then be fitted.

YBS Under Rafter Fixing DetailsUnder Rafter Fixing

SuperQuilt is rolled out to the under side of the rafters horizontally or vertically and stapled in position. All joints are taped with YBS Foil Tape.

At the eves SuperQuilt is sealed to the Cavity wall insulation or wall plate.

Counter battens are placed parallel or perpendicular with the rafters and fixed.

Plasterboard can then be fixed to the counter battens.

SuperQuilt is stapled to the underside of the rafters. At the eves the SuperQuilt is cut and taken down between the joists to the cavity wall insulation or the wall plate. The material needs to be sealed with staples and tape to the joists and the cavity wall insulation or wall plate to create an airtight envelope.

Under Rafter Fixing Details

Where roof head room is essential SuperQuilt can be recessed between the rafters.

1.SuperQuilt is stapled to the underside of the first rafter.

2.SuperQuilt is recessed into the rafter void and fixed by staples or with battens.

3.The material is then fixed to opposed rafter.

4.SuperQuilt is then wrapped around the rafter and the procedure starts again.

Once all the SuperQuilt is fitted all joints should be taped using aluminised foil tape.

Plasterboard can then be fixed directly to the underside of the rafters below the SuperQuilt.

Between Purlins Fixing Details

SuperQuilt is fixed horizontally or vertically and stapled to the underside of the the rafters.

At the purlins the SuperQuilt is turned up at stapled in place. Battens are fixed through the SuperQuilt into the rafters, at the purlins the battens are fixed into the rafters crushing the SuperQuilt tightly against the purlins.

Plasterboard can then be fixed to the battens.

Recessed and fixed between rafters

SuperQuilt can be fitted between rafters. In situations where head room is crucial SuperQuilt is recessed in to the rafter void to allow plaster-board to be fitted directly to the SuperQuilt on the underside of the rafters.

Behind Purlins Fixing Details

SuperQuilt is fixed horizontally or vertically and stapled to the underside of the the rafters.

At the purlins the SuperQuilt is cut and pushed behind the purlins then taped to the next piece at the opposed side of the purlin.

Battens are fixed through the SuperQuilt into the rafters.

Plasterboard can then be fixed to the battens.

Down lighters Fixing Details

Install the SuperQuilt as per fixing instructions.

There needs to be a 25mm clear cavity between the SuperQuilt and the down lighter.

Locate where the light will fit if there is not a 25mm clear cavity cut a hole in the SuperQuilt, with a radius 25mm larger than the down lighters.

Seal the cut edge of the SuperQuilt with YBS Foil Tape.

Fix the plasterboard and fit the light. We recommend fire hoods are used with all sunken lights.


Product Information and Certification

Links to manufacturer's information. Click to download in a separate browser window.

YBS SuperQuilt Roofs Datasheet | YBS SuperQuilt Walls Datasheet | YBS SuperQuilt Floors Datasheet | YBS SuperQuilt Pitched Roof BDA Certificate | YBS SuperQuilt Flat Roof BDA Certificate | YBS SuperQuilt Walls BDA Certificate | YBS SuperQuilt Floors BBA Certificate |

Product Certification

  • SuperQuilt roof application optionsDirective BDA Agréments (Praktijkbladen), September 2008
  • BDA Agrément Nr. BPD 08-276.2 Super Quilt 15 (phase: installation)
  • BDA Agrément Nr. BPD 08-277 Super Quilt 15 (phase: regulations and details)
  • BS 5534: 2003 Code of practice for slating and tiling (including shingles) – Design
  • BS 5250: 2002 Code of practice for control of condensation in buildings
  • BDA report 0024-L-08/1 Super Quilt 15: determination of the thermal performance (EN 12667), 2008.05.22
  • BDA report 0024-L-08/5 Super Quilt 15: determination of the thermal performance (EN 12667), 2008.07.11
  • CIM report no. 122/r3: an evaluation of Super Quilt Multi-layer Insulation blanket in roofs, February 2005
  • Fraunhofer report P17-138-e/2006 Super Quilt 15: determination of the mass per unit area (EN 1602), 2006.09.28
  • FraunhoferreportP17-138-e/2006Super Quilt15:dimensions(EN822),2006.09.28
  • TNO report Super Quilt 15: determination of the emission coefficient of the surfaces, 2008.04.29
  • Fraunhofer report P17-140-/2006 SuperQuilt15: tensile strength parallel to faces (EN1608), 2006.09.28
  • Fraunhofer report HoFM-09e/2006 Super Quilt 15: water vapour transmission properties (EN ISO 12572), 2006.10.04
  • Fraunhofer report P17-139-e/2006 Super Quilt 15: determination of dimensional stability under specified temperature and
    humidity conditions (EN 1604), 2006.09.28
  • Bodycote Warrington Fire Report 167855 Super Quilt 15: classification of reaction to fire performance (EN13501-1), 2007.10.08
  • BBA has awarded YBS FoilTec (used for the outer facings of SuperQuilt) the British Board of Agrément Certificate No. 09/4640

Priced on Application:

Generally, Products are readily available

Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.

Contact us directly for further information: Telephone 0333 8000 828  - Email: Click Here:


Contact Manufacturer

YBS Insulation

The Crags Industrial, Park Morven Street, Creswell, Derbyshire, S80 4AJ, England
Technical Telephone: +44 (0) 871 917 0044 - Note: Tech support calls are charged at 10p per minute from a UK BT landline, other networks may vary.
Facsimile: +44 (0) 844 99 100 55
Email: technical@ybsinsulation.com
Web site: www.ybsinsulation.com

Contact us

Insulation Online Limited

27 Massetts Road, Horley, Surrey, RH6 7DQ, UK

Telephone: 0333 8000 828

Facsimile: 0333 7000 797

Email: enquiries@insulation-online.com

Web site: www.insulation-online.com

insulation-online.com - we always deliver top quality products, competitive pricing and an efficient caring service