Kingspan Kooltherm K110
Premium performance rigid Phenolic soffit lining insulation board
Replaces Kingspan Kooltherm K10.
New lower Lambda Value (Thermal Conductivity) 0.018 W/mK... The most thermally efficient commonly used insulating board.
Unaffected by air infiltration. Resistant to the passage of water vapour.
Ideal for new build and refurbishment. Easy to handle and quick to install.
BBA certified and LABC registered.
Thicknesses and Availability:
Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Kooltherm Range includes the following readily available product thicknesses: 65mm, 75mm and 85mm.
The following thicknesses are manufactured to order and may have minimum order requirements: 25mm, 30mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 140mm, 160mm, 180mm and 200mm.
General information about Kingspan Kooltherm K110
Structural ceiling (soffit) insulating board
Kingspans premium performance ‘lower-lambda’ value phenolic foam insulation board, Kooltherm K110, is suitable for semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.
The core of Kingspan Kooltherm K110 Soffit Board is a premium performance fibre-free rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)
Faced with a low emissivity composite foil on the outer facing while the inner face is a glass tissue based facing, autohesively bonded to the insulation core during manufacture
|Thermal Conductivity||0.018 W/m·K|
|Compressive Strength||100 kPa at 10% compression||BS EN 826: 2013|
|Vapour Resistance||> 41.6 MNs/gm||BS EN 12086: 1997 / I.S. EN 12086: 1998|
Buy Kingspan Kooltherm K110
Limited stock of the most popular boards sizes may be held at some of our larger depots.
Where products need to be brought in from Kingspan, please allow approx. 1 week for delivery on stocked items (highlighted in green below in the properties section) and up to 3 weeks on made to order thicknesses. While Kingspan keep the majority of the popular thicknesses in stock, less popular thicknesses may carry a minimum order level.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times my vary.
Please observe the 'Star Rating' indicators to assess availability.
Generally 1 or 2 days for delivery
Generally 1 to 5 days for delivery
Generally 5 to 10 days for delivery
Generally 5 to 15 days for delivery
Please call to check availability and approximate lead times
Product availability depends upon stock levels at closest depot and delivery logistics to geographic locations
Product Performance and Guides
Product Performance, Manufacturer Certification, Downloads, and Installation Guides
While we have provided Thermal Resistance values for all thicknesses on the Kingspan K110 datasheet, some thicknesses may not be readily available.
Items highlighted in green are generally held in stock by Kingspan.
|Kingspan K110 60mm||60mm||3.30 m²K/W||2.85 kg/m²|
|Kingspan K110 65mm||65mm||3.60 m²K/W||3.09 kg/m²|
|Kingspan K110 70mm||70mm||3.85 m²K/W||3.09 kg/m²|
|Kingspan K110 75mm||75mm||4.15 m²K/W||3.66 kg/m²|
|Kingspan K110 80mm||80mm||4.40 m²K/W||3.87 kg/m²|
|Kingspan K110 85mm||85mm||4.70 m²K/W||4.10 kg/m²|
|Kingspan K110 90mm||90mm||5.00 m²K/W||4.14 kg/m²|
|Kingspan K110 100mm||100mm||5.55 m²K/W||4.71 kg/m²|
|Kingspan K110 110mm||110mm||6.10 m²K/W||5.19 kg/m²|
|Kingspan K110 120mm||120mm||6.65 m²K/W||5.63 kg/m²|
Standards & Approval
Kingspan Kooltherm K110 Soffit Board is manufactured to the highest standards under a management system certified to ISO 9001: 2015 (Quality Management Systems. Requirements), ISO 14001: 2015 (Environmental Management Systems. Requirements), BS / I.S. OHSAS 18001: 2007 (Occupational Health & Safety Management Systems. Requirements) and ISO 50001: 2018 (Energy Management Systems. Requirements with guidance for use).
The use of Kingspan Kooltherm K110 Soffit Board is covered by BBA Certificate 16/5299 and by LABC Registered Details Certificate No. EWWS545F2.