Building & Plasterboards

Showing 5–8 of 8 results

Manufacturer

Range

Product Type

Application

  • Gyproc Wallboard Duplex

    Gyproc Wallboard Duplex, a standard dry lining plasterboard backed with a metalised polyester film, is suitable for use in most internal wall and ceiling applications where vapour control and a plasterboard lining are both necessary.

    Available in thicknesses from 12.5mm and 15mm.

    £6.48£20.52 View products
  • Celotex PL4000

    Celotex PL4000 'Plasterboard Laminate', a rigid PIR foam insulation board with a 12.5mm tapered edge plasterboard on the front face and a composite aluminium foil/kraft paper on the back face, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists.

    Available in thicknesses from 37.5mm - 77.5mm.

    Has a Thermal Conductivity of 0.022 W/mK (0.19 W/mK for the plasterboard) and a compressive strength of 120kPa.

    £762.49£914.65 View products
  • Kingspan Kooltherm K110 Plus

    Kingspan Kooltherm K110 Plus, a rigid Phenolic foam insulation board with a 6mm A1 Euroclass building board on the outer facing and a glass tissue on the inner face, is suitable for use in semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.

    Available in thicknesses from 71mm - 126mm.

    Has a Thermal Conductivity between 0.019 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 41.6 MNs/gm.

    View products
  • Kingspan Kooltherm K118

    Kingspan Kooltherm K118, a rigid Phenolic foam insulation board with a 12.5mm tapered edge gypsum based plasterboard on the front facing and a perforated low emissivity composite foil on the hidden face, is suitable for use in wall applications where it is mechanically fixed to timber frames or steel wall linings as well as adhesive bonded (dot and dab) to brick, block, or concrete walls.

    Available in thicknesses from 37.5mm - 92.5mm.

    Has a Thermal Conductivity between 0.019 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 100 MNs/gm.

    £855.59£1,247.25 View products