PIR Insulation

Showing 5–8 of 16 results

Manufacturer

Range

Product Type

Application

  • Celotex <green>CW4000</green>

    Celotex CW4000

    Celotex CW4000 'Cavity Wall', a rigid PIR foam insulation board with low emissivity foil on both faces, is suitable for the following applications: partial fill cavity between the outer leaf and inner block with a 50mm residual cavity.

    Available in thicknesses from 40mm - 100mm.

    Has a Thermal Conductivity of 0.022 W/mK, a compressive strength of 120kPa and a Vapour Resistance that typically exceeds 150 MNs/gm.

    £10.40 – £814.31 View products
  • Celotex <green>PL4000</green>

    Celotex PL4000

    Celotex PL4000 'Plasterboard Laminate', a rigid PIR foam insulation board with a 12.5mm tapered edge plasterboard on the front face and a composite aluminium foil/kraft paper on the back face, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists.

    Available in thicknesses from 37.5mm - 77.5mm.

    Has a Thermal Conductivity of 0.022 W/mK (0.19 W/mK for the plasterboard) and a compressive strength of 120kPa.

    £859.16 – £973.30 View products
  • Ecotherm <green>Eco-Versal</green>

    Ecotherm Eco-Versal

    Ecotherm Eco-Versal, a rigid PIR foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: pitched roof above, between, or below the rafters, wall framing and solid, suspended or beam and block ground floors including underfloor heating applications.

    Available in thicknesses from 25mm - 150mm.

    Has a Thermal Conductivity of 0.022 W/mK, a compressive strength of 140kPa and a Vapour Restistance that typically exceeds 100 MNs/gm.

    £10.40 – £45.85 View products
  • Kingspan <green>Thermaroof TP10</green>

    Kingspan Thermaroof TP10

    Kingspan Thermapitch TP10, a rigid PIR foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: pitched roof above, between, or below the rafters as well as dwarf walls and loft floors.

    Available in thicknesses from 25mm - 165mm.

    Has a Thermal Conductivity of 0.022 W/mK, a compressive strength of 140kPa and a Vapour Restistance that typically exceeds 100 MNs/gm.

    £10.40 – £256.15 View products