PIR Insulation

Showing 13–16 of 16 results

Manufacturer

Range

Product Type

Application

  • Kingspan Thermaroof TR27

    Kingspan Thermaroof TR27, a rigid PIR foam insulation board with low emissivity foil on both faces, is suitable for the following applications: fully adhered single-ply, bonded built-up felt, mastic asphalt, and cold liquid applied waterproofing membranes.

    Available in thicknesses from 25mm - 150mm.

    Has a Thermal Conductivity ranging from 0.026 - 0.024 W/mK depending on thickness, a compressive strength of 150kPa and a Vapour Restistance that typically exceeds 300 MNs/gm.

    £80.88 – £178.36 View products

  • Recticel Eurothane GP

    Recticel Eurothane GP, a rigid PIR foam insulation board with a gas tight multilayer composite aluminium foil on both faces, is suitable for the following applications: pitched and flat roofs, solid masonry and framed wall systems, and floors.

    Available in thicknesses from 25mm - 150mm.

    Has a Thermal Conductivity of 0.022 W/mK, a compressive strength of ≥ 140kPa and a Vapour Resistance that typically exceeds 100 MNs/gm.

    £9.32 – £42.65 View products

  • Recticel Eurowall Cavity Plus

    Recticel Eurowall Cavity Plus, a rigid tongue & groove PIR foam insulation board with a low emissivity multilayer aluminium foil (with grid markings) on the outer facing while the inner face is a grey alkali resistant composite foil, is suitable for use in full fill cavity walls with a nominal residual cavity of 10mm.

    Available in thicknesses from 90 - 140mm.

    Has a Thermal Conductivity between 0.022 W/mK, a compressive strength of 100kPa and a Vapour Resistance that typically exceeds 100 MNs/gm.

    £438.69 – £444.51 View products
  • Unilin XT/PR-UF PIR insulation for roof and floor applications.

    Unilin Thin-R XT/PR-UF

    Unilin XT/PR-UF 'Pitched Roof - Underfloor', a rigid PIR foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: pitched roofs and solid or suspended ground floors with or without underfloor heating.

    Available in thicknesses from 15mm - 150mm.

    Has a Thermal Conductivity of 0.022 W/mK, a compressive strength of 150kPa and a Vapour Resistance that typically exceeds 300 MNs/gm.

    Unilin products are only available for delivery within the M25.

    £6.67 – £43.77 View products