Additional information
| Availability | 5 to 10 working days |
|---|
Kingspan Kooltherm K103 90mm, 3 x 1.2×2.4m = 8.64m²
Premium performance rigid Phenolic floor insulation board
Replaced Kingspan Kooltherm K3.
New lower Lambda Value (Thermal Conductivity) 0.019 W/mK... The most thermally efficient commonly used insulating board.
Used for insulating beam and block, concrete, and timber floors with or without underfloor heating systems.
Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.
Premium performance rigid thermoset fibre-free phenolic insulant.
Thicknesses and Availability:
Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Kooltherm Range includes the following readily available product thicknesses 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, 90mm, 100mm and 150mm.
The following thicknesses are manufactured to order and may have minimum order requirements: 80mm, 120mm, 130mm and 140mm.
Please see the Kingspan Kooltherm K103 range page for further details and all sizes.
| Product | inc-VAT | |
|---|---|---|
| Kingspan Kooltherm K103 90mm, 3 x 1.2×2.4m = 8.64m² | £314.66 |
Availability Indicators
Kingspan Kooltherm K103 is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Limited stock of the most popular boards sizes may be held at some of our larger depots, and thus, available on shorter lead times than the availability rating suggests.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times may vary.
- Generally 1 to 3 working days for delivery
- Generally 1 to 5 working days for delivery
- Generally 5 to 10 working days for delivery
- Special request or made to order item, allow extended lead times. Minimum order levels may apply.
- Please call to check availability and approximate lead times
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
Product Application
Floor insulating board
Kingspans premium performance lower-lambda value phenolic foam board, Kooltherm K103, is suitable for use in beam and dense block floors, between floor joists, suspended timber ground floors, between and under floor joists, concrete ground based floors, floating ground floors, upgrading concrete slab floors, and garage conversions.
Product Make-up
Core: Kingspan Kooltherm K103 floor board is a premium performance fibre-free rigid thermoset phenolic insulant.
Facings: Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.
Product Performance
| Thermal Conductivity | 0.019 W/mK | |
| Compressive Strength | 120 kPa at 10% compression | BS EN 826:2013 |
| Vapour Resistance | > 370 MNs/gm | BS EN 12086: 1997 / I.S. EN 12086: 1998 |
| Nominal Density | 35 kg/m³ |
Manufacturer Contact
- Kingspan Insulation
- 01544 388 601
- 01544 388 888
- www.kingspaninsulation.co.uk
- Kingspan Online U-Value Calculator
- info@kingspaninsulation.co.uk
- technical@kingspaninsulation.co.uk