Additional information
Availability | 5 to 10 working days |
---|
Premium performance rigid Phenolic wall framing insulation board
Replaced Kingspan Kooltherm K12.
New lower Lambda Value (Thermal Conductivity) 0.019 W/mK... The most thermally efficient commonly used insulating board.
Suitable for use with timber frame and steel frame wall construction.
Can be used between studs or as an insulating sheathing.
Premium performance rigid thermoset fibre-free phenolic insulant.
Thicknesses and Availability:
Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Kooltherm Range includes the following readily available product thicknesses 25mm, 40mm, 50mm, 60mm, 70mm, 75mm and 100mm.
The following thicknesses are manufactured to order and may have minimum order requirements: 80mm, 120mm, 130mm and 140mm.
Availability | 5 to 10 working days |
---|
Product | inc-VAT | |
---|---|---|
Kingspan Kooltherm K112 60mm, 5 x 1.2×2.4m = 14.4m² | £449.35 |
Kingspan Kooltherm K112 is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Limited stock of the most popular boards sizes may be held at some of our larger depots, and thus, available on shorter lead times than the availability rating suggests.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times may vary.
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
Timber and steel frame insulating board
Kingspans premium performance lower-lambda value phenolic foam board, Kooltherm K112, is suitable for use in timber and steel frame wall lining applications.
Core: The core of Kingspan Kooltherm K112 Framing Board is a premium performance rigid thermoset modified resin insulant.
Facings: Faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the board.
Thermal Conductivity | 0.019 W/mK | |
Compressive Strength | 100 kPa at 10% compression | BS EN 826:2013 |
Nominal Density | 35 kg/m³ |