Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Kooltherm Range includes the following readily available product thicknesses 25mm, 40mm, 50mm, 60mm, 70mm, 75mm and 100mm.
The following thicknesses are manufactured to order and may have minimum order requirements: 80mm, 120mm, 130mm and 140mm.
Kingspan Kooltherm K112 is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Limited stock of the most popular boards sizes may be held at some of our larger depots, and thus, available on shorter lead times than the availability rating suggests.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times may vary.
Generally 1 to 3 working days for delivery
Generally 1 to 5 working days for delivery
Generally 5 to 10 working days for delivery
Special request or made to order item, allow extended lead times. Minimum order levels may apply.
Please call to check availability and approximate lead times
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
Product Application
Timber and steel frame insulating board
Kingspans premium performance lower-lambda value phenolic foam board, Kooltherm K112, is suitable for use in timber and steel frame wall lining applications.
Product Make-up
Core: The core of Kingspan Kooltherm K112 Framing Board is a premium performance rigid thermoset modified resin insulant.
Facings: Faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the board.
Product Properties
Thickness
25mm to 140mm
Length
2.4m
Width
1.2m
Edge
Square
Product Performance
Thermal Conductivity
0.019 W/mK
Compressive Strength
100 kPa at 10% compression
BS EN 826:2013
Nominal Density
35 kg/m³
Product Variants
Product
Thickness
Thermal Resistance
kg/m²
Kingspan Kooltherm K112 25mm
25mm
1.30 m²K/W
1.24 kg/m²
Kingspan Kooltherm K112 40mm
40mm
2.10 m²K/W
1.76 kg/m²
Kingspan Kooltherm K112 50mm
50mm
2.60 m²K/W
2.11 kg/m²
Kingspan Kooltherm K112 60mm
60mm
3.15 m²K/W
2.46 kg/m²
Kingspan Kooltherm K112 70mm
70mm
3.65 m²K/W
2.81 kg/m²
Kingspan Kooltherm K112 75mm
75mm
3.90 m²K/W
2.99 kg/m²
Kingspan Kooltherm K112 80mm
80mm
4.20 m²K/W
3.16 kg/m²
Kingspan Kooltherm K112 90mm
90mm
4.70 m²K/W
3.51 kg/m²
Kingspan Kooltherm K112 100mm
100mm
5.25 m²K/W
3.86 kg/m²
Kingspan Kooltherm K112 110mm
110mm
5.75 m²K/W
4.21 kg/m²
Kingspan Kooltherm K112 120mm
120mm
6.30 m²K/W
4.56 kg/m²
Kingspan Kooltherm K112 130mm
130mm
6.80 m²K/W
4.91 kg/m²
Kingspan Kooltherm K112 140mm
140mm
7.35 m²K/W
5.26 kg/m²
Kingspan Kooltherm K112 150mm
150mm
7.85 m²K/W
5.61 kg/m²
While we have provided Thermal Resistance values for all thicknesses on the Kingspan Kooltherm K112 datasheet, some thicknesses may not be readily available.