Additional information
Availability | 5 to 10 working days |
---|
High performance rigid Phenolic external wall insulation board
Suitable for use behind traditional and lightweight polymer modified renders.
Unaffected by air infiltration. Resistant to the passage of water vapour.
Easy to handle and install; ideal for new build and refurbishment projects.
Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.
Thicknesses and Availability:
Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Kooltherm Range includes the following readily available product thicknesses: 50mm, 60mm and 70mm.
The following thicknesses are manufactured to order and may have minimum order requirements: 25mm, 30mm, 40mm, 80mm, 90mm, and 100mm.
Availability | 5 to 10 working days |
---|
Product | inc-VAT | |
---|---|---|
Kingspan Kooltherm K5 70mm, 6 x 0.6×1.2m = 4.32m² | £129.44 |
Kingspan Kooltherm K5 is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Limited stock of the most popular boards sizes may be held at some of our larger depots, and thus, available on shorter lead times than the availability rating suggests.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times may vary.
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
External wall insulating board for render systems
Kingspans high performance phenolic foam board, Kooltherm K5, is suitable for use in external wall applications with render systems.
Core: Kingspan Kooltherm K5 External Wall Board is a high performance rigid thermoset modified resin insulant.
Facings: Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.
Thermal Conductivity | 0.022 W/mK (insulant thickness 25 – 44 mm) 0.021 W/mK (insulant thickness ≥ 45 mm) | |
Compressive Strength | 120 kPa at 10% compression | BS EN 826:2013 |
Vapour Resistance | > 300 MNs/gm | BS EN 12086: 1997 / I.S. EN 12086: 1998 |
Nominal Density | 39 kg/m³ |