Additional information
Availability | 5 to 10 working days |
---|
High performance rigid Polyisocyanurate (PIR) pitched roof insulation board
Easy to handle and install.
Ideal for new build and refurbishment.
Can be used as detailed in Robust Details for Part E of the Building Regulations (England and Wales).
BBA Certified.
Unaffected by air infiltration; resistant to the passage of water vapour.
Thicknesses and Availability:
Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.
This Thermapitch Range includes the following readily available product thicknesses: 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 120mm, 125mm, 140mm and 150mm.
The following thicknesses are manufactured to order: 105mm, 110mm, 115mm, 130mm and 165mm; these may carry minimum order levels.
Availability | 5 to 10 working days |
---|
Product | inc-VAT | |
---|---|---|
Kingspan Thermapitch TP10 60mm, 5 x 1.2×2.4m = 14.4m² | £201.88 |
Kingspan Thermapitch TP10 is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Limited stock of the most popular boards sizes may be held at some of our larger depots, and thus, available on shorter lead times than the availability rating suggests.
Kingspan reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times may vary.
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
Pitched roof insulating board
Kingspans high performance polyisocyanurate (PIR) foam board, Thermapitch TP10, is suitable for use in rafter level warm roofs and in cold flat and pitched roof applications.
Core: Kingspan Thermapitch TP10 is manufactured with Nilflam technology, a high performance fibre–free rigid thermoset polyisocyanurate (PIR) insulant.
Facings: Faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture.
Thermal Conductivity | 0.022 W/mK | |
Compressive Strength | 140 kPa at 10% compression | BS EN 826:2013 |
Vapour Resistance | > 100 MNs/gm | BS EN 12086: 1997 / I.S. EN 12086: 1998 |
Nominal Density | 32 kg/m³ |