High performance rigid Polyisocyanurate (PIR) general application insulation board
Suitable for use in a number of applications including roof, wall and floor systems.
Can be used with under floor systems.
Easy to cut and shape.
Can be used to improve reliable long-term energy savings for buildings.
Thicknesses and Availability:
Available in most popular thicknesses at most depots; short lead-times may apply if we need to get stock in before delivering to site.
This Eurothane GP Range includes the following readily available product thicknesses: 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm and 150mm.
The following thickness is manufactured to order: 160mm; may carry minimum order levels.
|Recticel Eurothane GP 25mm, 1.2×2.4m = 2.88m²
Recticel Eurothane GP is sent out from depots nationwide and is subject to the Local Depot Delivery minimum order levels and delivery charge thresholds.
Recticel is available in certain geographic locations; where depots stock alternate brands, we will contact you to discuss before proceeding with the order.
Where products need to be brought in from Recticel, please allow approx. 2 week for delivery.
Product availability depends upon stock levels at closest depot and delivery logistics to geographic locations.
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.
General application insulating board
Recticel\\\'s high performance polyisocyanurate (PIR) foam board, Eurothane GP, is suitable for use in pitched and flat roofs, solid masonry walls, timber and steel framed systems, and floors.
Core: Recticel Eurothane GP is manufactured from rigid polyisocyanurate (PIR) using a blowing agent that has zero ozone depletion potential (zero ODP) and low global warming potential (GWP).
Facings: Faced on both sides with a gas tight multilayer composite aluminium foil, autohesively bonded to the insulation core during manufacture.
|120 kPa (insulant thickness < 50 mm) at 10% compression
140 kPa (insulant thickness > 50 mm) at 10% compression
|BS EN 826:2013
|> 100 MNs/gm
|EN ISO 10456