Thermafleece Breather Membrane

Description

Description

Light-weight breather membrane to hold Thermafleece insulation between joists

Suitable for use in floors to secure Thermafleece insulation between joists or as a protective layer above the insulation.

Can also be used as a conventional breather membrane over rafters or on the cold side of a timber frame structure where a heavier weight membrane is not required.

A light-weight membrane with good tensile strength and nail tear resistance.

Has good water resistance and a high breathability.

Easy to handle and install without gloves or protective clothing.

Installed with the white side facing inside and the grey to the outside.

Availability:

Available for delivery direct from the manufacturer with an approx. lead time of 3-5 days.

Category: Membranes

Product options

Quantity	Product	ex-VAT	inc-VAT
Thermafleece Breather Membrane, 1.5x16.7m = 25.05m² quantity	Thermafleece Breather Membrane, 1.5x16.7m = 25.05m²	£49.16	£58.99
Thermafleece Breather Membrane, 1.5x50m = 75m² quantity	Thermafleece Breather Membrane, 1.5x50m = 75m²	£133.80	£160.56
Thermafleece Tfloc Tape 50mm x 25m = 25lm quantity	Thermafleece Tfloc Tape 50mm x 25m = 25lm	£27.69	£33.23
Thermafleece Tfloc Tape 140mm x 25m = 25lm quantity	Thermafleece Tfloc Tape 140mm x 25m = 25lm	£62.15	£74.58

Availability Indicators

Thermafleece Breather Membrane is sent direct to site from the manufacturer and is subject to the Thermafleece Insulation & Membranes shipping charge.

Reasonable stock levels are held with delivery lead times being around 4-5 working days.

Thermafleece reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times my vary.

Generally 1 to 3 working days for delivery
Generally 1 to 5 working days for delivery
Generally 5 to 10 working days for delivery
Special request or made to order item, allow extended lead times. Minimum order levels may apply.
Please call to check availability and approximate lead times

Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me via our Contact Form or on 01903 899 898.

Product Application

Breather membrane for floors, walls and over rafter

Thermafleece Breather Membrane is suitable for use in floors as well as walls and roofs where a heavy weight membrane is not required.

Product Make-up

Core: Thermafleece Breather Membrane comprises 3 layers; two outer layers composed of a non-woven polypropylene and an inner breathable microporous film.

Product Properties

Colour	White / Light Grey
Weight	100 g/m²
Roll Length	16.7m and 50m
Roll Width	1.5m

Product Performance

Tensile strength	MD 185 / CD 85	EN 12311-1
Tear resistance	MD 75 / CD 95	EN12310-1
Resistance to air penetration	0.045 m³/m²h.50Pa	EN 12114
Resistance to water penetration	Class W1	EN 1928

Standards & Approval

Thermafleece Breather Membrane is manufactured in accordance with quality management system ISO 9001. All products must be installed in accordance with guidance issued by Thermafleece.

Thermafleece Breather Membrane material meets EN 13859-1 for pitched roofing and EN 13859-2 for walls.

Where building regulation approval is required, you should take advice from your local building control authority and the building designer.