Thermafleece UltraWool Slab 70mm, 14 x 0.59×1.2m = 9.91m²

British sheeps wool insulation for general applications within the building envelope

Suitable for use in a number of applications including roof, wall and floor systems.

Made in Britain from 75% British sheeps wool and 25% recycled polyester.

UltraWool is high density with better thermal values offer more efficient thermal and acoustic characteristics.

Higher thermal mass helps buffer heat to reduce summertime overheating.

Allows a healthy moisture balance helping protect building fabric and health.

Can be safely handled without gloves or protective clothing

Thicknesses and Availability:

This UltraWool range includes the following readily available product thicknesses: 50mm, 70mm and 90mm.


Additional information

Availability

5 to 10 working days

SKU: TFLCUWLS6070 Categories: ,
Product ex-VAT inc-VAT  
Thermafleece UltraWool Slab 70mm, 14 x 0.59×1.2m = 9.91m² £142.69 £171.23

Availability Indicators

Thermafleece UltraWool is sent direct to site from the manufacturer and is subject to the Thermafleece Insulation & Membranes shipping charge.

Reasonable stock levels are held with delivery lead times being around 4-5 working days. Larger orders can take a little longer ... up to 5-10 working days.

Thermafleece reserves the right to change stocked products - while we will do all we can to keep on top of changes, availability and lead times my vary.


  • Generally 1 to 3 working days for delivery
  • Generally 1 to 5 working days for delivery
  • Generally 5 to 10 working days for delivery
  • Special request or made to order item, allow extended lead times. Minimum order levels may apply.
  • Please call to check availability and approximate lead times

Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me.

Product Application

General application insulating slab

Thermafleece\'s natural sheeps wool slabs, UltraWool, is suitable for use in roofs, walls and floors throughout the building.

Product Make-up

Core: Thermafleece UltraWool slab is manufactured by combining British sheeps wool (75%) and recycled polyester and binders (25%) before being compressed and cut into dense slabs.

Product Performance

Thermal Conductivity0.035 W/m·K 
Nominal Densityapprox. 31 kg/m³ 
Water Absorption30% w/w@100% RH
Mould ResistancePassCUAP 2002-01-25
Moth/Beetle ProofingPassISO 3998
Vapour Resistance> 9 MNs/gm 

Standards & Approval

Thermafleece UltraWool is manufactured in accordance with quality management system ISO 9001. All products must be installed in accordance with guidance issued by Thermafleece.

Where building regulation approval is required, you should take advice from your local building control authority and the building designer.

  • GWP (A1-A3): 1.63 kgCO2e
  • GWP (A1-A3) inc. biogenic carbon: 0.59 kgCO2e
  • Recycled Content: 20%
  • Recyclable: Yes