1 to 5 working days
High performance rigid Polyisocyanurate (PIR) general application insulation board
Suitable for use in roof and ground floor applications, including underfloor heating applications.
Helps meet the requirements of Approved Document L and Section 6.
Includes low emissivity composite foil facings giving improved thermal insulation performance within cavity air spaces.
Can be used to provide reliable long-term energy savings for buildings.
Thicknesses and Availability:
Good availability for delivery to London; short lead-times may apply if we need to get stock in before delivering to site.
This XT/PR-UF Range includes the following available product thicknesses: 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm and 150mm.
1 to 5 working days
|Unilin Thin-R XT/PR-UF 20mm, 1.2×2.4m = 2.88m²||£15.07|
Unilin Thin-R XT/PR-UF is available for delivery within the London, M25 area only and is subject to the Unilin Insulation minimum order levels and delivery charge thresholds.
Reasonable stock levels are held of the popular thicknesses, where products need to be brought in from Unilin, please allow approx. 1 week for delivery.
Delivery charges will be calculated at check-out. Please visit our Ordering From Us page for further details on minimum order levels and delivery charges. If you have any queries, please do not hesitate to contact me.
Roof and/or floor application insulating board
Unilins high performance polyisocyanurate (PIR) foam board, Thin-R XT/PR-UF, is suitable for use in pitched roof and ground floor applications, including beam and block, solid and suspended ground floor.
Core: Unilin XT/PR-UF is manufactured from rigid polyisocyanurate modified polyurethane foam boards.
Facings: Faced on both sides with a low emissivity composite aluminium foil, autohesively bonded to the insulation core during manufacture.
|Thermal Conductivity||0.022 W/mK|
|Compressive Strength||150 kPa at 10% compression||BS EN 826|
|Vapour Resistance||> 300 MNs/gm|