SolaTube Ø25cm Flat Roof
Sun pipe system for flat roofs with a 25cm diameter tube.
Can be installed on EPDM, PVC, TPO, Bitumen, and CPE flat roofs.
Best suited for smaller spaces such as, but not limited to: spare bedrooms, bathrooms, toilets, corridors and landings.
Each installed system illuminates up to 10 m².
The polycarbonate roof domes have a fire classification of Tp(a), as certified by the BBA.
Recommended maximum tube install length is 6m.
This flashing is extruded from one piece of aluminium for a light yet strong, leak-free design.
General information about SolaTube Ø25cm Flat Roof System
SolaTube Ø25cm for installation on to flat roofs
This SolaTube Ø25cm flat roof flashing kit is suitable for installation on all types of roof coverings such as EPDM, PVC, TPO, Bitumen, and CPE.
Dome and Assembly (included in the system base kit)
Polycarbonate Flex Dome, Inner Dome, LightTracker Flex, 2 x Raybenders Flex, Top and Bottom Tube assembly, Brush Seal, Natural Effect Lens and Insulation Lens.
Flashing (included in the system base kit)
Ø25cm Flat Roof flashing and flashing insulator
Extension tubes and adjustable tubes (0-30° and 0-90°) can be added to the system to extend the install distance from roof to ceiling providing ease and flexibility of installation.
Choice of diffusers: Round Classic Vusion, Round JustFrost, Square JustFrost and Square Recessed Ceiling Diffuser.
* When choosing a Square Diffuser, a transition box is included as part of the base kit.
Buy SolaTube Ø25cm Flat roof kits
Product Performance and Guides
Product Performance, Manufacturer Downloads, and Installation Guides
Below are the technical specifications for both the standard SolaTube Ø25cm system and the SolaTube Ø25cm Energy Care Optima (ECO) version. The SolaTube Ø25cm ECO flat roof system can be purchased by Clicking Here
|Ø25 cm||Ø25 cm ECO|
|Light output in lumens3||1434||1127|
|Recommended maximum tube length1||max 6m||max 6m|
|U-value complete set2||1.3 W/m²K||0.5 W/m²K|
|Sound Insulation2 Dn,e,w (C Ctr)||65 (- 1;-5) dB||67 dB|
|Upward pressure / downward pressure4||UL 3352/DL 7182||UL 3352/DL 7182|
|Gust Load||SB 1350||SB 1350|
- SolaTube Ø25cm Flat roof install with Round Diffuser
- SolaTube Ø25cm Flat roof install with Square Diffuser
- SolaTube Ø25cm Technical datasheet
- SolaTube Ø25cm Flat roof flashing CAD drawing
- Round Classic Vusion Diffuser
- Round JustFrost Diffuser
- Square JustFrost Diffuser
- Square Recessed Ceiling Diffuser
- 0-30° Adjustable Angle Extension tube
- 0-90° Adjustable Angle Extension tube
- 61cm Long Extension tube
- 40cm Long Extension tube
- Click here for additional SolaTube component and accessory PDF's
- 02475 097 713
- [email protected]