SolaTube Ø35cm Flat Roof ECO
Sun pipe system for flat roofs with a 35cm diameter tube
ECO (Energy Care Optima) double walled insulated upstand flashing.
Can be installed on EPDM, PVC, TPO, Bitumen, and CPE flat roofs.
Best suited for smaller spaces such as, but not limited to: spare bedrooms, bathrooms, toilets, corridors and landings.
Each installed system illuminates up to 18 m².
The polycarbonate roof domes have a fire classification of Tp(a), as certified by the BBA.
Recommended maximum tube install length is 9m.
This flashing is extruded from one piece of aluminium for a light yet strong, leak-free design.
General information about SolaTube Ø35cm Flat Roof ECO System
SolaTube Ø35cm for installation onto flat roofs
This SolaTube Ø35cm ECO (Energy Care Optima) flat roof flashing kit is suitable for installation on all types of roof coverings such as EPDM, PVC, TPO, Bitumen, and CPE.
Each SolaTube Ø35cm Flat Roof System listed below in the Product Prices section will include:
Dome and Assembly
Polycarbonate Flex Dome, Inner Dome, LightTracker Flex, 2 x Raybenders Flex, Top and Bottom Tube assembly, Brush Seal, Natural Effect Lens and Insulation Lens.
Ø35cm Flat Roof flashing with a double walled insulated upstand and flashing insulator
On kits for install distances of more than 40cm, an appropriate number of extension tubes and tape will be included.
Choice of diffusers: Round Classic Vusion, Round Classic Optiview, Round JustFrost, Square JustFrost and Square Recessed Ceiling Diffuser.
* When choosing a Square Diffuser, a transition box is included.
Diffuser options (images)
Buy SolaTube Ø35cm Flat roof ECO kit
Reasonable stock levels are generally held with delivery lead times being approximately 2-3 days.
Please observe the 'Star Rating' indicators to assess availability.
Generally 1 or 2 days for delivery
Generally 1 to 5 days for delivery
Generally 5 to 10 days for delivery
Generally 5 to 15 days for delivery
Please call to check availability and approximate lead times
Product Performance and Guides
Product Performance, Manufacturer Certification, Downloads, and Installation Guides
Below are the technical specifications for both the SolaTube Ø35cm ECO (Energy Care Optima) and the standard SolaTube Ø35cm system. The standard SolaTube Ø35cm flat roof system can be purchased by Clicking Here
|Ø35 cm ECO||Ø35 cm|
|Light output in lumens3||2330||2884|
|Recommended maximum tube length1||max 9m||max 9m|
|U-value complete set2||0.7 W/m²K||1.3 W/m²K|
|Sound Insulation2 Dn,e,w (C Ctr)||66 dB||65 (- 2;-5) dB|
|Upward pressure / downward pressure4||UL 3352/DL 7182||UL 3352/DL 7182|
|Gust Load||SB 1350||SB 1350|
- 1 Solatube Lumen Output Tabels 4.1 - 7/05.
- 2 Research Grontmij (Sweco), Peutz en ITC-CNR.
- 3 Half-year average based on research by Grontmij (Sweco) en Lichtconsult.nl.
- 4 Tested with the EN 1873 method by British Board of Agrément.
Standards & Approval
The installation of SolaTube Ø35cm is covered by BBA Certificate 20/5762.
- SolaTube Ø35cm Flat roof install with Round Diffuser
- SolaTube Ø35cm Flat roof install with Square Diffuser
- SolaTube Ø35cm Technical datasheet
- SolaTube Ø35cm Flat roof ECO flashing CAD drawing
- Round Classic Vusion Diffuser
- Round Classic Optiview Diffuser
- Round JustFrost Diffuser
- Square JustFrost Diffuser
- Square Recessed Ceiling Diffuser
- 0-30° Adjustable Angle Extension tube
- 0-90° Adjustable Angle Extension tube
- 61cm Long Extension tube
- 40cm Long Extension tube
- Electric Light Fixture
- Manual Daylight Dimmer
- Bathroom Ventilation kit