SolaTube Components & Accessories

System components and accessories for SolaTube sun pipes

Maximum versatility with a range of flashings and casings to allow installation onto most roofs and walls.

Minimalist to eye-catching style, a wonderful list of diffusers are available to suit all tastes.

Numerous accessories available to create a system perfect for the room it will be installed into...

Use the following buttons to jump to the relevant component section on this page:


System Flashings

Flashings to suits most applications

SolaTube Flat roof flashing installed onto a flat roof

Flat Roof Flashing

Flashing with parrallel upstand

Can be installed on EPDM, PVC, TPO, Bitumen, and CPE flat roofs.

This flashing is extruded from one piece of aluminium for a light yet strong, leak-free design.

Good corrosion resistance, as a protective oxide layer naturally forms on aluminium.

SolaTube Ø25cm
SolaTube Ø35cm

SolaTube Flat roof ECO (Energy Care Optima) flashing installed onto a flat roof

Flat Roof Flashing ECO (Energy Care Optima)

Flashing with insulated parrallel upstand

ECO (Energy Care Optima) double walled insulated upstand flashing.

Can be installed on EPDM, PVC, TPO, Bitumen, and CPE flat roofs.

This flashing is extruded from one piece of aluminium for a light yet strong, leak-free design.

Good corrosion resistance, as a protective oxide layer naturally forms on aluminium.

SolaTube Ø25cm
SolaTube Ø35cm

SolaTube Pitched roof flashing installed onto a pitch roof with interlocking tiles

Pitch Roof Flashing

Universal Flashing with parrallel upstand

Can be installed quickly and easily on most pitched roofs.

Ubiflex carries BBA certification and is approved by NHBC and Zurich insurance.

Ubiflex is malleable like lead, allowing it to be formed into an infinite variety of shapes.

SolaTube Ø25cm
SolaTube Ø35cm

SolaTube Pitched roof ECO (Energy Care Optima) flashing installed onto a pitch roof with interlocking tiles

Pitch Roof Flashing ECO (Energy Care Optima)

Flashing with insulated parrallel upstand

Ubiflex insulated upstand flashing.

Can be installed quickly and easily on most pitched roofs.

Ubiflex carries BBA certification and is approved by NHBC and Zurich insurance.

Ubiflex is malleable like lead, allowing it to be formed into an infinite variety of shapes.

SolaTube Ø25cm
SolaTube Ø35cm

SolaTube Pitched roof slate & plain tile flashing installed onto a pitch roof with slate tiles.

Slate & Plain tile Flashing

Flashing with angled upstand

Can be installed quickly and easily on pitched roofs with slate or plain tiles of up to 0.8cm thickness.

Polypropylene pitched roof flashing with angled upstand.

Designed to ensure a secure connection between the Solatube and the roof to prevent water ingress throughout all weather conditions.

SolaTube Ø25cm
SolaTube Ø35cm

SolaTube Wall mount flashing installed onto a wall with cladding.

Wall Mount Casing

Straight tubular casing

50cm black recycled plastic tubular casing.

Used as part of the wall mount system to illuminate any room of the house or commercial premises.

Suitable for use where there is little space on the roof or when the room to be lit is not located directly below the roof.

SolaTube Ø25cm
SolaTube Ø35cm


Ceiling Diffusers

SolaTube daylighting systems don’t just deliver sunlight to interiors...they do it with style!

From the 'classic' Vusion and OptiView diffusers to Solatube Decorative Fixtures, you can enhance the look of any interior with options that range from practical to elegant to dazzling.

It all adds up to maximum output with maximum flexibility.

Round OptiView

A round glass diffuser with dazzling sky view Fresnel lenses for the ultimate in light clarity and a frosted surround, creates a halo ceiling effect.

SolaTube Ø25cm
SolaTube Ø35cm


Square OptiView

A square classic diffuser, with dazzling sky view Fresnel lenses for the ultimate in light clarity and a white surround.

SolaTube Ø25cm
SolaTube Ø35cm

Square Recessed

A square diffuser that is plastered into the ceiling to create a modern finish with flush, clean lines.

SolaTube Ø25cm
SolaTube Ø35cm


Round SolaTube Ø25cm AuroraGlo Diffuser

Round AuroraGlo

A round diffuser with a simple smooth rounded design.

SolaTube Ø25cm
SolaTube Ø35cm

Round SolaTube Ø25cm VividShade Diffuser

Round VividShade

A round diffuser, with a fabric chic meets contemporary look.

SolaTube Ø25cm
SolaTube Ø35cm


SolaTube Accessories

Product Performance, Manufacturer Certification, Downloads, and Installation Guides

Extension Tubes

SolaTube Spectralight extension tubes and adjustable angle, for SolaTube Ø25 and Ø35 kits, provide maximum flexibility without compromise, bringing light to any room in the property.

The world's most reflective tubing transfers maximum daylight from rooftop to diffuser with minimal light loss and perfect colour rendition.

  • Delivers 99.7%* specular reflectivity for maximum daylight transfer
  • Provides the purest colour rendition possible so colours are truer and brighter
  • Allows for lengthy tube installation (Ø25 = max. 6m and Ø35 max. 9m)
  • * Specular reflectance greater than 99% with wavelength specific reflectance up to 99.7% for the visible spectrum

Spectralight tubes include INFRAREDuction, a technology integrated into the tubing that uses a proprietary process to filter out infrared wavelengths and minimize solar heat gain.


Venitlation Kits

The Ventilation Add-On Kit combines daylighting and ventilation into one attractive fixture, leaving your rooms humidity-free and your ceiling looking orderly and uncluttered.

Available for Ø25 system, the venitlation add-on kit is suitable for installation in to bathrooms, toilets and kitchens.

The basic roof terminal is the basis for the Solatube ventilation system. It has the unique feature that it has a pull-promoting effect 24 hours a day. Air is exhausted from the house in almost all weather conditions. The top roof part of the roof terminal is fitted with a smart construction: a collection system which ensures that condensation cannot flow back into the ventilation channel. After the cooled air has condensed in the tube, the moisture is discharged to the outside.

The roof flashing (outside roof) has an electrically driven fan for extra ventilation capacity when it is required. As the fan is positioned outside the house, the suction effect is maximized, but the noise is minimal!

The natural ventilation functions continuously, the mechanical ventilation is only activated at those times and places where it is desired. This ensures a 100% optimal indoor climate at minimal cost.

The fan is easy to connect and can be switched manually or automatically.

  • Fan flow in operation at least 75 m3 / h.
  • Fan electrical specifications: 230 V - 50/60 Hz - 18 Watt.
  • IP 55 in accordance with EN 60529.
  • Cabling: 2 x 0.5 mm2 with a length of 2000 mm.

Flat Roof Ventilation kit

The flat roof flashing is suitable for all types of flat roof coverings, such as: EPDM, PVC, TPO, Bitumen, CPE.

SolaTube Ø25cm
SolaTube Ø35cm

Pitch Roof Ventilation kit

The pitch roof flashing is suitable for installation onto all pitch roofs with plain or interlocking tiles.

SolaTube Ø25cm
SolaTube Ø35cm


Light Fixtures

SolaTube lighting fixtures can be added to a Solatube kit to create a multifunctional system that provides both daylight during the day and artificial light at night.

Lighting Fixture
  • GU10 max. 20 Watt LED bulb
  • 220 to 240 V
  • -20 to +50 C
  • approx. 25000 hours
TechLED Fixture
  • Intergrated TechLED bulb*
  • 220 to 240 V
  • -20 to +50 C
  • approx. 50000 hours
  • * Complete fixture needs replacing once the bulb goes.

Daylight Dimmers

Full control for the perfect light level with a Solatube® daylight dimmer. Using a patented butterfly baffle, the daylight dimmer offers you the ability to adjust the amount of light streaming in through the SolaTube system by upto 98%.

SolaTube automatic Daylight Dimmer.

Daylight Dimmer

Using a patented butterfly baffle and a convenient wall-mounted switch or remote control, the Daylight Dimmer lets you adjust room light levels simply and easily.

SolaTube Ø25cm
SolaTube Ø35cm

SolaTube manual Daylight Dimmer.

Manual Dimmer

The manual daylight dimmer kit is easy to use and install to either an existing or new Solatube.

Can only be used with a Classic Vusion or Classic OptiView ceiling diffuser.

SolaTube Ø25cm
SolaTube Ø35cm

Minimum order level - £175.00 ex-VAT. For further details on Delivery Charges and Minimum Order levels, please Click Here