Thermal Laminates - Insulation Online https://www.insulation-online.com/product-category/thermal-laminates/ Your fast, efficient and caring service for the supply of competitively priced, trusted building and insulation products. Thu, 10 Jul 2025 14:08:58 +0000 en-GB hourly 1 https://wordpress.org/?v=6.8.3 Celotex PL4000 https://www.insulation-online.com/product/celotex-pl4000/ Mon, 22 May 2023 12:35:38 +0000 https://insulation-online.com/?post_type=product&p=1756 Celotex PL4000 'Plasterboard Laminate', a rigid PIR foam insulation board with a 12.5mm tapered edge plasterboard on the front face and a composite aluminium foil/kraft paper on the back face, is suitable for the following applications: dot and dab or mechanically fixed dry lining direct to masonry and timber or steel frame walls and the underside of rafters or joists.

Available in thicknesses from 37.5mm - 77.5mm.

Has a Thermal Conductivity of 0.022 W/mK (0.19 W/mK for the plasterboard) and a compressive strength of 120kPa.

The post Celotex <green>PL4000</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) insulated plasterboard

Can be easily used to help upgrade to current building regulation standards in pitched roof, flat roof and wall applications.

Ideal option for internal solid wall insulation.

Suitable for both direct bonding (‘dot and dab’) and mechanically fixed installation.

Featuring an inbuilt vapour control layer.

Ideal for new build, retrofit, and refurbishment.

Thicknesses and Availability:

All thicknesses are available from the manufacturer; short lead-times may apply as we may need to get the products in from Celotex before delivering to site.

This PL4000 Range includes the following available product thicknesses: 37.5mm, 52.5mm, 62.5mm, 72.5mm and 77.5mm.

Generally sold in pallet quantities only, however, we will happily check to see if individual depots will split pallets, depending on you requirements.

The post Celotex <green>PL4000</green> appeared first on Insulation Online.

]]> Kingspan Kooltherm K110 Plus https://www.insulation-online.com/product/kingspan-kooltherm-k110-plus/ Wed, 17 May 2023 10:12:52 +0000 https://insulation-online.com/?post_type=product&p=1635 Kingspan Kooltherm K110 Plus, a rigid Phenolic foam insulation board with a 6mm A1 Euroclass building board on the outer facing and a glass tissue on the inner face, is suitable for use in semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.

Available in thicknesses from 71mm - 126mm.

Has a Thermal Conductivity between 0.019 W/mKand a compressive strength that exceeds 100 kPa when tested to BS EN 826: 2013.

The post Kingspan <green>Kooltherm K110 Plus</green> appeared first on Insulation Online.

]]> Premium performance rigid Phenolic soffit lining insulation with non-combustable building board

Replaced Kingspan Kooltherm K10.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Bonded to an impact resistant non-combustable building board.

Ideal for new build and refurbishment. Easy to handle and quick to install compared to some other commonly used insulants.

Premium performance rigid thermoset fibre-free phenolic core.

Unaffected by air infiltration.

Thicknesses and Availability:

The following thicknesses are manufactured to order and may have minimum order requirements: 71mm, 76mm, 81mm, 86mm, 91mm, 96mm, 106mm, 116mm and 126mm.

The post Kingspan <green>Kooltherm K110 Plus</green> appeared first on Insulation Online.

]]> Kingspan Kooltherm K118 https://www.insulation-online.com/product/kingspan-kooltherm-k118/ Tue, 11 Apr 2023 09:51:36 +0000 https://insulation-online.com/?post_type=product&p=94 Kingspan Kooltherm K118, a rigid Phenolic foam insulation board with a 12.5mm tapered edge gypsum based plasterboard on the front facing and a perforated low emissivity composite foil on the hidden face, is suitable for use in wall applications where it is mechanically fixed to timber frames or steel wall linings as well as adhesive bonded (dot and dab) to brick, block, or concrete walls.

Available in thicknesses from 37.5mm - 92.5mm.

Has a Thermal Conductivity between 0.019 W/mK.

The post Kingspan <green>Kooltherm K118</green> appeared first on Insulation Online.

]]> Premium performance rigid Phenolic insulated plasterboard

Replaced Kingspan Kooltherm K17 & K18.

Insulation, dry–lining and vapour control in one board.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Suitable for both mechanical fixing and dot & dab adhesive bonding.

Premium performance rigid thermoset fibre-free phenolic core.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses: 37.5mm, 42.5mm, 52.5mm, 57.5mm, 62.5mm and 72.5mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 32.5mm, 67.5mm, 82.5mm, 87.5mm and 92.5mm

The post Kingspan <green>Kooltherm K118</green> appeared first on Insulation Online.

]]>