Kingspan - Insulation Online https://www.insulation-online.com/brands/kingspan/ Your fast, efficient and caring service for the supply of competitively priced, trusted building and insulation products. Wed, 13 Aug 2025 09:08:56 +0000 en-GB hourly 1 https://wordpress.org/?v=6.8.3 Kingspan Kooltherm K110 Plus https://www.insulation-online.com/product/kingspan-kooltherm-k110-plus/ Wed, 17 May 2023 10:12:52 +0000 https://insulation-online.com/?post_type=product&p=1635 Kingspan Kooltherm K110 Plus, a rigid Phenolic foam insulation board with a 6mm A1 Euroclass building board on the outer facing and a glass tissue on the inner face, is suitable for use in semi-exposed concrete floor decks in new and existing car parks, storage areas, loading bays and similar areas beneath habitable domestic buildings.

Available in thicknesses from 71mm - 126mm.

Has a Thermal Conductivity between 0.019 W/mKand a compressive strength that exceeds 100 kPa when tested to BS EN 826: 2013.

The post Kingspan <green>Kooltherm K110 Plus</green> appeared first on Insulation Online.

]]> Premium performance rigid Phenolic soffit lining insulation with non-combustable building board

Replaced Kingspan Kooltherm K10.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Bonded to an impact resistant non-combustable building board.

Ideal for new build and refurbishment. Easy to handle and quick to install compared to some other commonly used insulants.

Premium performance rigid thermoset fibre-free phenolic core.

Unaffected by air infiltration.

Thicknesses and Availability:

The following thicknesses are manufactured to order and may have minimum order requirements: 71mm, 76mm, 81mm, 86mm, 91mm, 96mm, 106mm, 116mm and 126mm.

The post Kingspan <green>Kooltherm K110 Plus</green> appeared first on Insulation Online.

]]> Kingspan Thermaroof TR27 https://www.insulation-online.com/product/kingspan-thermaroof-tr27/ Wed, 17 May 2023 09:59:48 +0000 https://insulation-online.com/?post_type=product&p=1632 Kingspan Thermaroof TR27, a rigid PIR foam insulation board with low emissivity foil on both faces, is suitable for the following applications: fully adhered single-ply, bonded built-up felt, mastic asphalt, and cold liquid applied waterproofing membranes.

Available in thicknesses from 25mm - 150mm.

Has a Thermal Conductivity ranging from 0.027 - 0.024 W/mK depending on thickness, a compressive stress exceeding 150kPa and a Vapour Restistance that typically 300 MNs/g for the insulation core and 1 MNs/g for the glass tissue facing.

The post Kingspan <green>Thermaroof TR27</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) flat roof insulation board

Can be used on flat roofs with fully adhered single-ply, partially bonded built-up felt, mastic asphalt, and cold liquid waterproofing.

Fully compatible with single–ply non–bituminous membranes that are fully bonded with solvent based adhesive systems.

Fully compatible with most bitumen based and mastic asphalt waterproofing systems.

Compatible with most green roof systems.

Ideal for new build and refurbishment.

Resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Thermaroof Range includes the following readily available product thicknesses: 25mm, 50mm, 80mm, 100mm, 120mm, 130mm, 140mm and 150mm.

The following thicknesses are manufactured to order: 70mm, 75mm, 90mm, 110mm and 160mm; these may carry minimum order levels.

The post Kingspan <green>Thermaroof TR27</green> appeared first on Insulation Online.

]]> Kingspan Thermaroof TR26 https://www.insulation-online.com/product/kingspan-thermaroof-tr26/ Wed, 17 May 2023 09:22:30 +0000 https://insulation-online.com/?post_type=product&p=1624 Kingspan Thermaroof TR26, a rigid PIR foam insulation board with low emissivity foil on both faces, is suitable for the following applications: mechanically fixed waterproofing membranes on concrete, timber, and metal deck as well as green roof systems.

Available in thicknesses from 25mm - 150mm.

Has a Thermal Conductivity of 0.022 W/mK, an average compressive stress exceeding 150kPa and a Vapour Restistance that typically resistance of 300 MNs/g for the insulation core and 80 MNs/g for the composite foil-facing.

The post Kingspan <green>Thermaroof TR26</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) flat roof insulation board

Can be used on flat roofs with mechanically fixed single-ply waterproofing membranes.

Fully compatible with most mechanically fixed single–ply waterproofing systems.

Compatible with most green roof systems.

Ideal for new build and refurbishment.

Resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Thermaroof Range includes the following readily available product thicknesses: 25mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 130mm, 140mm and 150mm.

The following thicknesses are manufactured to order: 40mm, 105mm, 115mm, 125mm, 135mm, and 160mm; these may carry minimum order levels.

The post Kingspan <green>Thermaroof TR26</green> appeared first on Insulation Online.

]]> Kingspan Thermaroof TR24 https://www.insulation-online.com/product/kingspan-thermaroof-tr24/ Wed, 17 May 2023 09:08:40 +0000 https://insulation-online.com/?post_type=product&p=1608 Kingspan Thermaroof TR24, a rigid PIR foam insulation board with bitumen coated glass tissue finished with a thermofusible polypropylene fleece on the upper facing while the lower face is a mineralised glass tissue, is suitable for the following applications: flat roofs waterproofed with most torch on applied waterproofing applications.

Available in thicknesses from 25mm - 150mm.

Has a Thermal Conductivity ranging from 0.027 - 0.024 W/mK, a compressive stress that exceeds 150 kPa and a Vapour Resistance 300 MNs/g for the insulation core and 80 MNs/g for the composite foil-facing.

The post Kingspan <green>Thermaroof TR24</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) flat roof insulation board

Can be used on flat roofs with partially bonded torch applied multi-layer bituminous waterproofing.

Compatible with majority of torch applied waterproofing systems.

Ideal for new build and refurbishment.

Resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Thermaroof Range includes the following readily available product thicknesses: 50mm, 80mm, 100mm 120mm and 130mm.

The following thicknesses are manufactured to order: 30mm, 140mm and 150mm; these may carry minimum order levels.

The post Kingspan <green>Thermaroof TR24</green> appeared first on Insulation Online.

]]> Kingspan Thermawall TW55 https://www.insulation-online.com/product/kingspan-thermawall-tw55/ Tue, 16 May 2023 13:59:13 +0000 https://insulation-online.com/?post_type=product&p=1598 Kingspan Thermawall TW55, a rigid PIR foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: timber framing systems, timber sheathing systems, and metal framing sysems.

Available in thicknesses from 25mm - 165mm.

Has a Thermal Conductivity of 0.022 W/mK, an average compressive stress exceeding 140 kPa at 10% compression and a Vapour Restistance that typically exceeds 50 MNs/g for the insulation core and 100 MNs/g for the composite foil-facing.

The post Kingspan <green>Thermawall TW55</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) wall framing insulation board

Can be used between studs or as an insulating sheathing.

Suitable for use with timber frame and steel frame wall constructions.

Easy to handle and install compared to some other commonly used insulants.

Ideal for new build and refurbishment.

BBA certified.

Unaffected by air infiltration; resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Thermawall Range includes the following readily available product thicknesses: 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 120mm, 125mm, 140mm and 150mm.

The following thicknesses are manufactured to order: 105mm, 110mm, 115mm, 130mm and 165mm; these may carry minimum order levels.

The post Kingspan <green>Thermawall TW55</green> appeared first on Insulation Online.

]]> Kingspan Thermaroof TP10 https://www.insulation-online.com/product/kingspan-thermaroof-tp10/ Tue, 16 May 2023 13:43:43 +0000 https://insulation-online.com/?post_type=product&p=1580 Kingspan Thermapitch TP10, a rigid PIR foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: pitched roof above, between, or below the rafters as well as dwarf walls and loft floors.

Available in thicknesses from 25mm - 165mm.

Has a Thermal Conductivity of 0.022 W/mK, a compressive stress of 140 kPa at 10% compression and a Vapour Restistance that typically exceeds 50 MNs/g for the insulation core and 100 MNs/g for the composite foil-facing.

The post Kingspan <green>Thermaroof TP10</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) pitched roof insulation board

Easy to handle and install compared to some other commonly used insulants.

Ideal for new build and refurbishment.

Can be used as detailed in Robust Details for Part E of the Building Regulations (England and Wales).

BBA Certified.

Unaffected by air infiltration; resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Thermapitch Range includes the following readily available product thicknesses: 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 120mm, 125mm, 140mm and 150mm.

The following thicknesses are manufactured to order: 105mm, 110mm, 115mm, 130mm and 165mm; these may carry minimum order levels.

The post Kingspan <green>Thermaroof TP10</green> appeared first on Insulation Online.

]]> Kingspan Thermafloor TF70 https://www.insulation-online.com/product/kingspan-thermafloor-tf70/ Tue, 16 May 2023 13:22:34 +0000 https://insulation-online.com/?post_type=product&p=1560 Kingspan Thermafloor TF70, a rigid PIR foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: beam and dense block floors, between floor joists, suspended timber ground floors, between and under floor joists, beam and block floors, concrete based ground floors, and floating ground floors.

Available in thicknesses from 25mm - 165mm.

Has a Thermal Conductivity of 0.022 W/mK, an average compressive stress that exceeds 140kPa and a Vapour Restistance greater than 50 MNs/g for the insulation core and greater than 100 MNs/g for the composite foil-facing.

The post Kingspan <green>Thermafloor TF70</green> appeared first on Insulation Online.

]]> High performance rigid Polyisocyanurate (PIR) floor insulation board

Easy to handle and install compared to some other commonly used insulants.

Ideal for new build and refurbishment.

Can be used as detailed in Robust Details for Part E of the Building Regulations (England and Wales).

BBA Certified.

Unaffected by air infiltration; resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Thermafloor Range includes the following readily available product thicknesses: 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 120mm, 125mm, 140mm and 150mm.

The following thicknesses are manufactured to order: 105mm, 110mm, 115mm, 130mm and 165mm; these may carry minimum order levels.

The post Kingspan <green>Thermafloor TF70</green> appeared first on Insulation Online.

]]> Kingspan Kooltherm K15 https://www.insulation-online.com/product/kingspan-kooltherm-k15/ Tue, 16 May 2023 11:57:16 +0000 https://insulation-online.com/?post_type=product&p=1542 Kingspan Kooltherm K15, a rigid Phenolic foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: rainscreen facade systems.

Available in thicknesses from 25mm - 150mm.

Has a Thermal Conductivity ranging from 0.021 and 0.022 W/mK and a compressive strength that exceeds 100 kPa when tested to BS EN 826: 2013.

The post Kingspan <green>Kooltherm K15</green> appeared first on Insulation Online.

]]> High performance rigid Phenolic rainscreen insulation board

Rigid phenolic insulation for use behind rainscreen facade systems.

Successfully tested in differing façade systems to BS 8414-1: 2015 + A1: 2017, BS 8414-2: 2005 & BS 8414-2: 2015 + A1: 2017, in accordance with the performance criteria set out in BR 135.

Ideal for new build and refurbishment.

Unaffected by air infiltration. Resistant to the passage of water vapour.

In order to check availability and order Kingspan Kooltherm K15, a Kingspan Kooltherm K15 request form will need to be filled in so that we can pass the details on to Kingspan in order to check stock and/or source the products.

The post Kingspan <green>Kooltherm K15</green> appeared first on Insulation Online.

]]> Kingspan Kooltherm K5 https://www.insulation-online.com/product/kingspan-kooltherm-k5/ Tue, 16 May 2023 10:35:05 +0000 https://insulation-online.com/?post_type=product&p=1532 Kingspan Kooltherm K5, a rigid Phenolic foam insulation board with glass tissue on both faces, is suitable for the following applications: external wall applications with render systems.

Available in thicknesses from 20mm - 70mm.

Has a Thermal Conductivity ranging from 0.022 - 0.021 W/mK and a compressive strength that exceeds 100 kPa when tested to EN 826: 2013

The post Kingspan <green>Kooltherm K5</green> appeared first on Insulation Online.

]]> Premium performance rigid Phenolic external wall insulation board

Suitable for use behind traditional and lightweight polymer modified renders.

Unaffected by air infiltration. Resistant to the passage of water vapour.

Easy to handle and install compared to some other commonly used insulants; ideal for new build and refurbishment projects.

Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses: 50mm, 60mm and 70mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 25mm, 30mm, 40mm, 80mm, 90mm, and 100mm.

The post Kingspan <green>Kooltherm K5</green> appeared first on Insulation Online.

]]> Kingspan Kooltherm K112 https://www.insulation-online.com/product/kingspan-kooltherm-k112/ Tue, 16 May 2023 10:18:25 +0000 https://insulation-online.com/?post_type=product&p=1525 Kingspan Kooltherm K112, a rigid Phenolic foam insulation board with low emissivity composite foil on both faces, is suitable for the following applications: timber and steel frame wall lining applications.

Available in thicknesses from 25mm - 140mm.

Has a Thermal Conductivity of 0.019 W/mK and a compressive strength that exceeds 100 kPa when tested to BS EN 826: 2013.

The post Kingspan <green>Kooltherm K112</green> appeared first on Insulation Online.

]]> Premium performance rigid Phenolic wall framing insulation board

Replaced Kingspan Kooltherm K12.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Suitable for use with timber frame and steel frame wall construction.

Can be used between studs or as an insulating sheathing.

Premium performance rigid thermoset fibre-free phenolic core.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses 25mm, 40mm, 50mm, 60mm, 70mm, 75mm and 100mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 80mm, 120mm, 130mm and 140mm.

The post Kingspan <green>Kooltherm K112</green> appeared first on Insulation Online.

]]>