Suitable for use in warm roof applications, installed over, between or under pitched roof rafters.

Includes low emissivity aluminium foil facings giving improved thermal insulation performance within cavity air spaces.

Light weight; easy to cut and install.

Can be used to improve reliable long-term energy savings for buildings.

BBA certified.

Thicknesses and Availability:

Good availability for delivery to London; short lead-times may apply if we need to get stock in before delivering to site.

This Safe-R SR/PR Range includes the following readily available product thicknesses: 25mm, 40mm, 50mm, 60mm, 75mm, 80mm, 100mm and 120mm.

The post Unilin <green>Safe-R SR/PR</green> appeared first on Insulation Online.

Replaced Kingspan Kooltherm K10.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Bonded to an impact resistant non-combustable building board.

Ideal for new build and refurbishment. Easy to handle and quick to install compared to some other commonly used insulants.

Premium performance rigid thermoset fibre-free phenolic core.

Unaffected by air infiltration.

Thicknesses and Availability:

The following thicknesses are manufactured to order and may have minimum order requirements: 71mm, 76mm, 81mm, 86mm, 91mm, 96mm, 106mm, 116mm and 126mm.

The post Kingspan <green>Kooltherm K110 Plus</green> appeared first on Insulation Online.

Rigid phenolic insulation for use behind rainscreen facade systems.

Successfully tested in differing façade systems to BS 8414-1: 2015 + A1: 2017, BS 8414-2: 2005 & BS 8414-2: 2015 + A1: 2017, in accordance with the performance criteria set out in BR 135.

Ideal for new build and refurbishment.

Unaffected by air infiltration. Resistant to the passage of water vapour.

In order to check availability and order Kingspan Kooltherm K15, a Kingspan Kooltherm K15 request form will need to be filled in so that we can pass the details on to Kingspan in order to check stock and/or source the products.

The post Kingspan <green>Kooltherm K15</green> appeared first on Insulation Online.

Suitable for use behind traditional and lightweight polymer modified renders.

Unaffected by air infiltration. Resistant to the passage of water vapour.

Easy to handle and install compared to some other commonly used insulants; ideal for new build and refurbishment projects.

Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses: 50mm, 60mm and 70mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 25mm, 30mm, 40mm, 80mm, 90mm, and 100mm.

The post Kingspan <green>Kooltherm K5</green> appeared first on Insulation Online.

Replaced Kingspan Kooltherm K12.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Suitable for use with timber frame and steel frame wall construction.

Can be used between studs or as an insulating sheathing.

Premium performance rigid thermoset fibre-free phenolic core.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses 25mm, 40mm, 50mm, 60mm, 70mm, 75mm and 100mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 80mm, 120mm, 130mm and 140mm.

The post Kingspan <green>Kooltherm K112</green> appeared first on Insulation Online.

Replaced Kingspan Kooltherm K10.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Unaffected by air infiltration. Resistant to the passage of water vapour.

Ideal for new build and refurbishment. Easy to handle and quick to install compared to some other commonly used insulants.

Premium performance rigid thermoset fibre-free phenolic core.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses: 70mm, 75mm and 85mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 65mm, 90mm, 100mm, 110mm and 120mm.

The post Kingspan <green>Kooltherm K110</green> appeared first on Insulation Online.

Replaced Kingspan Kooltherm K8.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Low emissivity foil facings significantly increase the thermal performance of the cavity.

Boards are designed to fit easily with standard brick and block dimensions allow the insertion of wall ties at appropriate spacing.

Premium performance rigid thermoset fibre-free phenolic core.

Unaffected by air infiltration. Resists moisture penetration by allowing a clear cavity to be maintained.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses: 50mm, 60mm, 75mm and 100mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 70mm, 80mm, 90mm, 110mm, 120mm, 130mm, 140mm and 150mm.

The post Kingspan <green>Kooltherm K108</green> appeared first on Insulation Online.

Replaced Kingspan Kooltherm K7.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Used for insulating pitched roofs at rafter level, between ceiling joists, cold pitched and flat roofs.

Premium performance rigid thermoset fibre-free phenolic core.

Unaffected by air infiltration. Resistant to the passage of water vapour.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thickness: 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, 80mm, 100mm and 120mm.

The following thicknesses are manufactured to order: 90mm, 110mm, 130mm, 140mm and 150mm; these may carry minimum order levels.

The post Kingspan <green>Kooltherm K107</green> appeared first on Insulation Online.

A full-fill option as an alternate to the Kingspan K108 partial fill boards.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Used for insulating cavity walls with a 10mm residual cavity up to 25m high.

The water–tight, vapour–open polypropylene fleece outer facing protects against moisture penetration.

Unaffected by air infiltration. Resists moisture penetration by allowing a clear cavity to be maintained.

Boards are designed to fit easily with standard brick and block dimensions.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thickness: 90mm.

The following thickness is manufactured to order and may have minimum order requirements: 115mm.

The post Kingspan <green>Kooltherm K106</green> appeared first on Insulation Online.

Replaced Kingspan Kooltherm K3.

New lower Lambda Value (Thermal Conductivity) 0.019 W/mK… The most thermally efficient commonly used insulating board.

Used for insulating beam and block, concrete, and timber floors with or without underfloor heating systems.

Faced on both sides with a glass tissue based facing, autohesively bonded to the insulation core during manufacture.

Premium performance rigid thermoset fibre-free phenolic insulant.

Thicknesses and Availability:

Available in most popular thicknesses from the manufacturer; short lead-times apply as we may need to get the products in from Kingspan before delivering to site.

This Kooltherm Range includes the following readily available product thicknesses 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, 90mm, 100mm and 150mm.

The following thicknesses are manufactured to order and may have minimum order requirements: 80mm, 120mm, 130mm and 140mm.

The post Kingspan <green>Kooltherm K103</green> appeared first on Insulation Online.